https://www.nanoscienceandtechnology.co.in Latest Products Tue, 06 Oct 2026 00:26:51 +0530 en-us https://www.nanoscienceandtechnology.co.in https://www.nanoscienceandtechnology.co.in/nst-1100-degree-c-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1100-degree-c-atmosphere-muffle-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 Heating element The hot end roughness D1 of the silicon molybdenum rod is 7mm, the average manufacturer adopts 6MM, the heating end is thick, the surface load of the rod is low, and the service life is long. It adopts hot bending technology, with uniform resistance and long service life The length of the cold end of the Lu is 210mm, 400X300X300 furnace is 260, the general manufacturer adopts 180mm, and the cold end has a low temperature. The surface oxidation of silicon molybdenum rod is compact and can better protect the silicon molybdenum rod.   Install air switch and leakage protector: When an electric current or leakage, an empty meeting automatically disconnects.   Can connect with computer This furnace is equipped with communication interface and software, can be directly through the furnace computer control of each parameter, and can be observed from the computer PV on the stove and SV temperature value and instrument operation, the actual temperature of the furnace curve drawing computer real time, and can keep the temperature data of each time, can call up at any time.   Chamber Imported VS Chinese High quality high pure alumina polycrystalline fiber cured furnace with vacuum suction and filter molding. Adopt Japanese technology to form. The spacing and pitch of the resistance wire in the furnace are arranged according to the best thermal technology of Japan, and the temperature field is simulated by thermal software Using 4 weeks heating, the temperature is more balanced The furnace can not remove powder, heat insulation, high reflectivity and temperature balance, which is strong against heat and shrinkage   Optional UL certified electrical board (all imported electrical appliances approved by UL)   Trigger VS Soft start limited flow trigger   Most of the manufacturers use the non – limited Xiamen botany trigger Phase shift trigger (with soft start and current limiting function) Current limiting function: no matter how the heating time is adjusted, the secondary current of our electric furnace after the transformer is limited to 170A, and the equipment is limited. Unlimited-flow triggers, if the heating rate is set wrong or too fast, The current is so large at low temperature that the device can trip or burn. Soft start function: the current will gradually increase when starting up, and the impact on the heating element will be small, which will help to prolong the life of the heating element Protection function: if the current exceeds the limiting current, the trigger will automatically cut off the trigger function to cut off the current protection furnace.   UL certified transformer The transformer cable is pure copper Small transformer Low temperature of transformer The stainless steel tank of hydrogen atmosphere furnace is installed in the chamber of a stove or furnace a stainless steel tank, the tank oven door USES silicone O ring seal, in order to reduce O ring seal temperature in the furnace door is equipped with water cooling system, thermocouple, inlet valve, the valve installed on the tank, pressure gauge, etc; This furnace installation with hydrogen detector, burner, the combustion controller, alarm lights, torches, explosion-proof valve, etc., after gas after flow meter by chamber in and out, tail gas from the door of the oven after cooling water system. Can pass, argon, nitrogen, oxygen, hydrogen gases such as carbon monoxide, ammonia decomposition gas, &energy-saving equilibrium temperature field, the surface temperature is low, lifting speed, energy saving, clean furnace temperature is not easy to contaminated, universities, research institutes, industrial and mining enterprises do protect the sintering atmosphere, reducing atmosphere, skim the ideal product. https://www.nanoscienceandtechnology.co.in/muffle-furnaces.htm https://www.nanoscienceandtechnology.co.in/muffle-furnaces.htm Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/tmax-1200-degree-c-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/tmax-1200-degree-c-muffle-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 NST 1200°C Muffle Furnace w/ Kanthal (Sweden) Heating Elements NST 1200°C Muffle muffle furnaces feature the famous Kanthal(Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface.   Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.   Features: Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type K thermocouple. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished. https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-atmosphere-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-1400C Atmosphere has many advantages of uniform temperature field,low surface temperature,heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering,atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing,phase-shift trigger,controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing,silicon gel sealed cover,sealed door with silicon gel gasket and water cooling system,gas float through flow meter,then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth,which can pre-vacuum and pass H2,Ar,N2,O2,CO,NH3 and so on. Temperature controller: Shimaden FP93 40 programmable segments (Shimaden fp93 made in Japan), It can separate into 4,2,1 programs, ie. 4×10 segments. FP93 have 6 PID controls, different PID are used for low,middle,high temperature for precise control.Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420⁰ or thermocouples is broken, “ON” on the board is off and “OFF” is on)There is Fahrenheit (F) and Celsius (C) for option.With 485 communication interface: which can stop the furnace automatically. Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened. Chamber:it is imported from Japan,  good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction. Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life. Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current. Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time. Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger Gas system:floating flow meter or digital flow meter is for option to control gas Speed. Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly. https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-max-controlled-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-max-controlled-atmosphere-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1400°C Max Controlled Atmosphere Muffle Furnace w/ PC Interface   NST 1400 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.   The benefits of an controlled atmosphere furnace An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.    Gases One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.   Temperature Proper temperature control is vital to the success of your project as well. Temperatures that are too high or too low will cause problems with the process and could cost your company a significant amount of money. Across International furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.   Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket. Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use. Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.) Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type S thermocouple.   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished. https://www.nanoscienceandtechnology.co.in/nst-1600-degree-c-16x12x12-inch-40-segment-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1600-degree-c-16x12x12-inch-40-segment-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1600°C 16x12x12″ 40-Segment Muffle Furnace w/ PC Interface NST-1600Muffle muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface.   Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.   Features: Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type B thermocouple. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished. https://www.nanoscienceandtechnology.co.in/nst-1600-degree-c-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1600-degree-c-atmosphere-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-1600C Atmosphere has many advantages of uniform temperature field,low surface temperature,heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering,atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing,phase-shift trigger,controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing,silicon gel sealed cover,sealed door with silicon gel gasket and water cooling system,gas float through flow meter,then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2,Ar,N2,O2,CO,NH3 and so on.   Features: Temperature controller: Shimaden FP93 40 programmable segments (Shimaden fp93 made in Japan), It can separate into 4,2,1 programs, ie. 4×10 segments.FP93 have 6 PID controls, different PID are used for low,middle,high temperature for precise control. Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420⁰or thermocouples is broken, “ON” on the board is off and “OFF” is on) There is Fahrenheit (F) and Celsius (C) for option. With 485 communication interface: which can stop the furnace automatically. Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened. Chamber:it is imported from Japan,  good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction. Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life. Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current. Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time. Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger Gas system:floating flow meter or digital flow meter is for option to control gas Speed. Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly. https://www.nanoscienceandtechnology.co.in/nst-1600c-high-temperature-microwave-sintering-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1600c-high-temperature-microwave-sintering-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1600C High Temperature Microwave Sintering Furnace https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-40-segment-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-40-segment-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1700°C 40-Segment Muffle Furnace w/ PC Interface NST-1700 Muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface.   Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.   Features Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type B thermocouple. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished. https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-atmosphere-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1700°C Atmosphere Muffle Furnace NST-1700C Atmosphere has many advantages of uniform temperature field,low surface temperature,heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering,atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing,phase-shift trigger,controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing,silicon gel sealed cover,sealed door with silicon gel gasket and water cooling system,gas float through flow meter,then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2,Ar,N2,O2,CO,NH3 and so on.   Features: Temperature controller: Shimaden FP9340 programmable segments (Shimaden fp93 made in Japan), It can separate into 4,2,1 programs, ie. 4×10 segments. FP93 have 6 PID controls, different PID are used for low,middle,high temperature for precise control.Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420⁰or thermocouples is broken, “ON” on the board is off and “OFF” is on)There is Fahrenheit (F) and Celsius (C) for option.With 485 communication interface: which can stop the furnace automatically. Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened. Chamber:it is imported from Japan,  good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction. Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life. Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current. Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time. Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger Gas system:floating flow meter or digital flow meter is for option to control gas Speed. Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly. https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-max-controlled-atmosphere-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1700-degree-c-max-controlled-atmosphere-muffle-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 1700 Series controlled atmosphere furnaces feature a chamber with Mitsubishi(Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled byShimaden(Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.   The benefits of an controlled atmosphere furnace An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.   Gases One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.   Temperature Proper temperature control is of great importance to the experimental project. Temperatures that are too high or too low can cause problems in the process and may incur additional costs.Our furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.   Features: Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket. Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.*Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.) Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished.   Ultimate vacuum level for furnaces is around 100 Pa with all flange connections, and 1000 Pa with hose barb connections. Please keep in mind that our  atmosphere furnaces are NOT designed to be vacuum furnaces, the vacuuming part is mainly for users to pre-vac the chamber, before putting in inert or other protective gases.   Temperature Control: Controller: Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments). Maximum heating rate: 15°C per minute Minimum temperature: 300°C (recommend at least 800°C for longer heating element life) Maximum/constant temperatures: 1700°C/1600°C (Depends on gas environment) https://www.nanoscienceandtechnology.co.in/nst-1800-degree-c-7-x-6-x-6-inch-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1800-degree-c-7-x-6-x-6-inch-muffle-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 NST 1800°C 7x6x6″ Muffle Furnace w/ Kanthal (Sweden) Heating Element NST -1800Muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface.   Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.   Features: Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type B thermocouple. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished.   Temperature Controller: Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments) Eurotherm temperature controller (optional) https://www.nanoscienceandtechnology.co.in/vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/vacuum-oven.htm Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/nst-high-temperature-up-to-1600-c-microwave-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-high-temperature-up-to-1600-c-microwave-muffle-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 High Temperature Up To 1600C Microwave Muffle Furnace Microwave heating. Temperature up to 1600 degree. Heating speed up to 50 degree per minute. No pollution to material.   Application Field: Claiming / synthesis of powder or particle materials: Electronic ceramic powders: barium titanate, barium-strontium titanate, strontium titanate, barium zirconate titanate; Lithium ion battery anode materials: lithium cobaltoxide, lithium manganate; Various colorants, glaze material, inorganic pastel; Alumina, magnesium oxide, zinc oxide, manganese dioxide, manganous-manganicoxide, zirconia, ammonium metavanadate, vanadium pentoxide, titanium dioxide, zinc carbonate, manganese carbonate, aluminum hydroxide, magnesium hydroxide, lithium cobaltoxide, zinc ferrite, Tri-chromatic rare earth fluorescent powder (Red), cement.   Synthesis / sintering of devices: Electronic ceramics: Piezoresistive element, thermistor, piezoceramics, microwave medium ceramics; Magnetic materials: hard magnetic, Ni-Zn, gyromagnet ferrites; Honeycomb ceramics, daily-use ceramics and glass ware; Oxide ceramics and refractory materials: alumina, zirconia, magnesium oxide and other oxide composites; Incineration, cremation, scaling loss experiments   Protection and Safety: Anode over voltage, anode over current, anode power surpass, electromagnet watchdog, magnetron temperature, external interlock. Control System: PLC (18 sections of temperature control), embedded system connected to laptop via USB, with data storage and printing functions. https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-high-temperature-microwave-research-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-high-temperature-microwave-research-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-High-vacuum High-temperature Microwave Research Furnace For Lab The high-vacuum, high-temperature microwave research furnace is typically used for synthesis or sintering of magnetic materials, ceramics, metal powders.   Control system: Embedded system control mode, can be connected to PC, can realize data storage and printing function; can set multiple process curves, each curve can set 40 process parameters; with automatic / manual operation dual function;   Bring a protective atmosphere system;   https://www.nanoscienceandtechnology.co.in/nst-laboratory-1100c-electric-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-laboratory-1100c-electric-muffle-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 NST 1100°C Compact Muffle Furnace (4x4x4″,1.0L) with Programmable Controller NST-DSP-KF1100 is a CE certified compact muffle furnace that offers high purity fibrous alumina chamber, gas inlet and outlet ports and a 30-segment, programmable temperature controller, and the furnace is with UL Certified electric components. It is the ideal muffle furnace for preparing small-sized sample using temperatures up to 1100oC in material research and dental labs with maximum energy saving. In addition, the compact furnace can be placed into a glove box to sinter samples in a vacuumed or controlled atmosphere.   Operating Temperature 1000°C max continuously 1100°C max for an hour 1200°C max for 30 minutes   Chamber Size Size: 4″x4″x4″  or 100x100x100 mm Capacity: 65 cubic-inch or 1 liter   Power 110V version: 950 W (15A Fuse) ( power cord is included ) 220V version: 1.2KW(10A Fuse)   Temperature Controller PID automatic control and auto-tune function. 30 programmable segments for precise control. Built in protection for the over-heating and broken thermocouple. Large digital control panel (48 x 96 mm) for easy operation.   Application Notes With the small footprint, low weight and low power requirement, it can be easily accommodated in a glove box and heat treat samples under protective gas.   Warnings Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.   https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-40-segment-muffle-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1400-degree-c-40-segment-muffle-furnace.htm Fri, 17 May 2024 00:00:00 +0530 1400°C 40-Segment Muffle Furnaces w/ PC Interface NST-1400 Muffle muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and silicon carbide (SiC) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface.   Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.   Features Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot. Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting. Built-in computer interface. Long life type S thermocouple. CE compliant   Safety Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions. Power failure protection resumes furnace operation right after the point of failure when power is reestablished. https://www.nanoscienceandtechnology.co.in/cy-am180-v7x-vacuum-arc-melting-furnace.htm https://www.nanoscienceandtechnology.co.in/cy-am180-v7x-vacuum-arc-melting-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 This product is a small vacuum arc melting furnace with tungsten electrodes and water-cooled copper crucible. The equipment melting temperature can exceed 3000℃, and the temperature is reduced rapidly. The equipment adopts stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition, which is very suitable for sample melting and heat treatment, phase diagram research. During smelting, the metal is placed in the water-cooled copper crucible. According to the process requirements, the furnace can be filled with high-purity inert protective gas, and the high-temperature plasma generated by the arc is used to melt the metal. Multi-station copper crucible can be used for a variety of small metal (about 3g ~ 5g per station) smelting in sequence, with the side control lever for tilting and rotating metal ingots after smelting. There is a larger cavity in the middle of the copper crucible for mixed smelting of the alloy (which can hold about 25g). The smelting furnace is also equipped with a vacuum suction casting mold. The user can replace and install it by simple tools. After replacement, the vacuum suction casting function can be realized. The cylindrical metal sample can be made to facilitate subsequent cutting, clamping and analysis operations.   Vacuum arc melting furnace features: The device has the advantages of small size, stable performance, simple operation, comprehensive functions and convenient use, and is very suitable for laboratory research on small doses of metal samples.   Crucible Water-cooled copper crucible with 7 cavities, 6 cavities φ25mm×8mm,the large working cavity φ40mm×12mm can be used for mixed smelting alloy. Vacuum suction casting mold crucible, φ13mm×33mm. https://www.nanoscienceandtechnology.co.in/nst-vacuum-molybdenum-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-vacuum-molybdenum-furnace.htm Mon, 06 Jul 2026 00:00:00 +0530 The equipment features and the main purpose Basic principles and uses In the case of vacuum or atmosphere protection of the material for non-polluting heat treatment equipment can be nitrogen argon hydrogen and other atmosphere sintering.  Mainly used in high temperature atmosphere sintering high temperature vacuum sintering transparent ceramics and other materials sintering.   The structure of the composition Furnace body furnace lid bottom vacuum system control system cooling system heating body and insulation screen.   The structure that The furnace vertical shell its inner and outer are made of 304 stainless steel cylinder the outer mirror polished.  Inside and outside the tube and the front and rear flange welded into a whole the furnace body with electrode holes suction holes vent holes thermocouple holes infrared holes and observation holes the interface materials are stainless steel. The lid from inside and outside the head and flange welding the middle of the water can be cooled the lid open device. The bottom the inside and outside the head and flange composition the middle of the water cooling the lower part of the filling and discharging holes fixed in the lower part of the furnace with electrode extraction device. Heating body and insulation screen heating elements made of high purity film effectively increase the radiation area to ensure uniformity of the temperature zone.  The bottom of the insulation screen with a tungsten plate the other using the template and stainless steel plate production. The vacuum system mainly by the direct pump molecular pump or diffusion pump pneumatic baffle valve pneumatic shut-off valve digital composite vacuum gauge vacuum pipe bleed valve bracket and other components; vacuum pipe and pump between  Metal corrugated hose quick connector connection (slow vibration).   The control system A computer automatic control system (optional) Automatic PLC flat panel touch computer control (XP) system you can manually switch automatically.  Features are as follows The control system software is developed by our company man-machine interface operating system picture-friendly simple operation fast running real-time monitoring of the furnace conditions the system is stable and reliable. Software color simulation screen display industrial grade Tablet PC fast response anti-interference ability temperature display and vacuum valve control are integrated analog screen operation. The device can adopt the temperature curve power curve vacuum curve water temperature curve air pressure curve and sintering time curve user-friendly analysis based on historical curve sintering process.  Data can automatically generate excel file through the usb interface test. The temperature control method for the following thermocouple 1700 ℃ temperature control more than 1700 ℃ infrared instrument automatic control high and low temperature automatic conversion. Communication interface such as RS232 RS422 CAN LAN USB etc. easy and other equipment networking applications.  Software control interface visualization can dynamically display the workflow convenient and intuitive. The software free upgrade for life.   Standard configuration manual instrument automatic temperature control 1700 ℃ below the thermocouple temperature control more than 1700 ℃ infrared instrument automatic control high and low temperature automatic conversion.   Water cooling system the furnace the upper and lower end of the cover with water-cooled structure of the form in and out of the water main pipe installed on the hydraulic relay and pressure gauge while the control cabinet connected to the abnormal state alarm.  Can qualitatively observe the water flow size of each waterway.  The entire water cooling system to ensure. https://www.nanoscienceandtechnology.co.in/turbo-molecular-pump-station.htm https://www.nanoscienceandtechnology.co.in/turbo-molecular-pump-station.htm Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/oxygen-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/oxygen-plasma-cleaner.htm Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/lab-thin-film-coating-system.htm https://www.nanoscienceandtechnology.co.in/lab-thin-film-coating-system.htm Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/doctor-blade-film-coater-screen-printing-coater.htm https://www.nanoscienceandtechnology.co.in/doctor-blade-film-coater-screen-printing-coater.htm Lab Thin Film Coating System Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/plasma-sputtering-coater.htm Lab Thin Film Coating System Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/thermal-evaporation-coater.htm https://www.nanoscienceandtechnology.co.in/thermal-evaporation-coater.htm Lab Thin Film Coating System Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/magnetron-sputter-coater.htm https://www.nanoscienceandtechnology.co.in/magnetron-sputter-coater.htm Lab Thin Film Coating System Wed, 28 Feb 2024 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-magnetron-sputtering-coater.htm Tue, 15 Oct 2024 00:00:00 +0530 HIGH VACUUM MAGNETRON SPUTTERING COATER is used for the preparation of novel thin film materials such as nanometer single-layer and multi-layer functional film, hard film, metal film, semiconductor film and dielectric film. It can be widely used in the research of thin film materials and the production of small batch. It can be widely used in universities and colleges, scientific research institutes of thin film materials preparation research and small batch. https://www.nanoscienceandtechnology.co.in/four-sources-thermal-evaporation-system.htm https://www.nanoscienceandtechnology.co.in/four-sources-thermal-evaporation-system.htm Sat, 30 Mar 2024 00:00:00 +0530 FOUR SOURCES THERMAL EVAPORATION SYSTEM is suitable for coating most of metallic and organic materials film up to 2″ size from 200 ºC to 1500 ºC (or 200 ºC – 1700 ºC with an optional B-type thermocouple).The sample stage can be rotated to obtain a more uniform film.The evaporating system is small in size, which can effectively save laboratory space; it is easy to operate and has strong adaptability to different materials, so it is widely used in the laboratories of universities and research institutes. 280 mm O.D.×260 mm I.D.×310 mm Height quartz chamber for easy cleaning and sample loading 2″ Dia rotatable evaporating sources for the uniform film coating Tungsten coil heater and alumina crucible for high-temperature coating up to 1700 ºC Precision temperature control with 30 programmable segments and +/- 1 ºC accuracy High vacuum can be achieved up to 1.0E-5 Torr via optional turbopump Gas flow port and valve are built in for chamber purge and CVD possibility https://www.nanoscienceandtechnology.co.in/nst-electron-beam-evaporation-coating-system.htm https://www.nanoscienceandtechnology.co.in/nst-electron-beam-evaporation-coating-system.htm Sat, 30 Mar 2024 00:00:00 +0530 ELECTRON BEAM EVAPORATION COATING SYSTEM is used for preparing conductive film, semiconductor film, ferroelectric film, optical film, etc. It is widely used in colleges and universities, scientific research institutions and small batch production. https://www.nanoscienceandtechnology.co.in/dual-chamber-pulse-laser-coater.htm https://www.nanoscienceandtechnology.co.in/dual-chamber-pulse-laser-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 DUAL CHAMBER PULSE LASER COATER is used for growing optical crystals, ferroelectrics, ferromagnets, superconductors and organic compound thin film materials, suitable for growing high melting point, multi-elements and complex layered superlattice thin film materials containing gas elements. It is widely used in the research and manufacture of thin film materials in colleges and universities. https://www.nanoscienceandtechnology.co.in/nst-5-heads-rf-plasma-magnetron-sputtering-coater-machine.htm https://www.nanoscienceandtechnology.co.in/nst-5-heads-rf-plasma-magnetron-sputtering-coater-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 CUSTOMIZED 5 HEADS NST PLASMA MAGNETRON SPUTTERING COATER is particularly suitable for exploring solid electrolyte materials, combined by 5 different elements in 16 different ratios.This equipment is mainly used to make an oxide film on a single crystal substrate, so there is no need for a high vacuum environment.   https://www.nanoscienceandtechnology.co.in/combinatorial-plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/combinatorial-plasma-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 COMBINATORIAL PLASMA SPUTTERING COATER is also suitable for sequential coating of multiple layer films such as ferroelectric, alloy, semiconductor, ceramic, dielectric, optical, oxide, hard, PTFE, etc.Compared with similar equipment, it is not only widely used, but also has the advantages of small size and easy operation. It is an ideal equipment for laboratory preparation of material films, especially suitable for laboratory research on solid electrolytes and OLEDs. https://www.nanoscienceandtechnology.co.in/high-power-dc-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/high-power-dc-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 HIGH POWER NST MAGNETRON SPUTTERING COATER uses PLC control panel to control the equipment, which is convenient and intuitive to operate.It has a 2-inch water cooling target head and a rotatable sample stage,The water cooling target makes the surface of the sample after coating not deformed due to excessive coating temperature, and even damages the sample; the sample stage can be rotated, and the sample can be rotated while coating to make the surface of the sample uniform after coating. The device is small in size and cost-effective. It is an ideal coating equipment for making various metal films. It can be equipped with various metal targets and vacuum pump. https://www.nanoscienceandtechnology.co.in/dual-target-rf-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/dual-target-rf-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 DUAL TARGET RF MAGNETRON SPUTTERING COATER is equipped with 300W power supply and 500W DC power supply. The DC power supply can be used for the preparation of metal film, and the power supply can be used for the preparation of non-metal films. The two targets can meet the needs of multi-layer coatings. If customers have other coating needs, DC power supply and pulse power supply can be customized. Various types of power supply are available from 300W to 1000W in various specifications.   The coating machine has a two-channel high precision mass flow meter. If customers have other requirements, the gas channel of up to four-channel mass flow meter can be customized to meet the complex gas environment requirements. The instrument is equipped with advanced turbo molecular pump group, and ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase.   In addition, this machine is equipped with two high precision film thickness gauges, which can meet the film thickness detection requirements during the coating process. If customers need to install multiple film thickness gauges, also can contact our technical staff for customization.   This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Dual-target magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, the dual-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/cy-msp300s-2rf-dual-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/cy-msp300s-2rf-dual-target-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 DUAL-TARGET MAGNETRON SPUTTERING COATER is equipped with two 300W power supply. The DC power supply can be used for the preparation of metal film, and the RF power supply can be used for the preparation of non-metal. The two targets can meet the needs of multi-layer or multiple coatings.   The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Dual-target magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, the dual-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/nst-dual-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-dual-target-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST DUAL-TARGET MAGNETRON SPUTTERING COATER is equipped with a 500W DC power supply and a 300W RF power supply. The DC power supply can be used for the preparation of metal film, and the RF power supply can be used for the preparation of non-metal. The two targets can meet the needs of multi-layer or multiple coatings.   The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Dual-target magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, the dual-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/nst-compact-powder-coating-system.htm https://www.nanoscienceandtechnology.co.in/nst-compact-powder-coating-system.htm Sat, 30 Mar 2024 00:00:00 +0530 COMPACT POWDER NST COATING SYSTEM is a small powder coating system consisting mainly of a 2-inch magnetron sputtering head and a vibrating sample stage. The powder is vibrated on the vibrating sample stage, and is coated on the surface of the powder by sputtering to form a core-shell structure. NST magnetron sputtering is suitable for metallic materials on powder surfaces. NST magnetron sputtering is suitable for coating non-metallic materials or carbon on the surface of materials. https://www.nanoscienceandtechnology.co.in/compact-dc-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/compact-dc-magnetron-sputtering-coater.htm Fri, 29 Mar 2024 00:00:00 +0530 COMPACT DC MAGNETRON SPUTTERING COATER is designed to make some metal films,the film area can be up to 4 inches.It has a 2 inch size and the height between the sample stage and the sputter head can be adjusted between 30 and 80 mm. A manually operable sputter baffle is installed for pre-sputtering. The sputtering time of the sputtering head can be adjusted between 1 and 120 s. If you want a thin film, the sputtering time can be set shorter; if you want a thick film, the sputtering time can be longer.The device is small in size and cost-effective. It is an ideal coating equipment for making various metal films. It can be equipped with various metal targets and vacuum pump. https://www.nanoscienceandtechnology.co.in/nst-small-high-vacuum-thermal-evaporation-coater.htm https://www.nanoscienceandtechnology.co.in/nst-small-high-vacuum-thermal-evaporation-coater.htm Fri, 29 Mar 2024 00:00:00 +0530 SMALL HIGH VACUUM THERMAL EVAPORATION COATER instrument is a high vacuum compact thermal evaporation coater with evaporation temperature from 200℃ to 1700℃. The tungsten wire basket is used as the evaporation source, and the evaporation source is built in at the bottom of high purity alumina crucible. The upper cover is equipped with a rotatable sample stage, which can effectively improve the uniformity of film formation. The instrument has a high-precision temperature control system and uses circulating heating method, which can stabilize the evaporation of metals and organic matter. Stainless steel high-vacuum chamber design, with high-precision molecular pump, can achieve high vacuum requirements, the high vacuum can effectively improve the efficiency and quality of the evaporation coating.   https://www.nanoscienceandtechnology.co.in/nst-small-high-vacuum-two-in-one-film-coater.htm https://www.nanoscienceandtechnology.co.in/nst-small-high-vacuum-two-in-one-film-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 THE PLASMA SPUTTERING AND EVAPORATING TWO-IN-ONE FILM COATER is equipped with DC sputtering target and thermal evaporation assembly, which can be used not only for plasma sputtering, but also obtain carbon or other metal simple films by evaporation. In order to improve the coating quality, this two-in-one film coater adopts stainless steel vacuum chamber with high vacuum design of precision molecular pump, high vacuum degree can effectively improve the purity and uniformity of coating, which is conducive to get better experimental results. The sample stage has the function of rotation and heating, which can improve the film adhesion and film uniformity. The instrument is small in size, saves space, and can be placed on the test bench. It is very suitable for universities and research institutions.   Small high vacuum two-in-one film coater applications: Scanning electron microscope sample surface gold spraying, steaming gold, carbon spraying and other operations, as well as the preparation of non-conductor material test electrodes. https://www.nanoscienceandtechnology.co.in/nst-small-evaporation-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-small-evaporation-coating-machine.htm Wed, 03 Apr 2024 00:00:00 +0530 SMALL EVAPORATION COATING MACHINE has a high precision temperature control system, using the cycle heating method, can stably evaporate metal and some organic matter. Using high purity quartz cavity as vacuum chamber, coating process can be seen completely. The instrument is equipped with bipolar rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa and meet the vacuum environment required by most evaporation and coating experiments. This instrument is suitable for evaporation and coating most of the metal and some organic materials film. It has compact structure and small size, which is a cost-effective laboratory coating equipment.   https://www.nanoscienceandtechnology.co.in/nst-1400-clifting-vacuum-atmosphere-elevating-lifting-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-1400-clifting-vacuum-atmosphere-elevating-lifting-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 THE VACUUM ATMOSPHERE LIFTING FURNACE FOR SILICON CARBIDE HEATING ELEMENTS, USES the three layers of shell structure and the Japanese island of 40 program temperature control system, electric phase-shifting trigger, thyristor control, furnace using 1600 type of polycrystal alumina fibre materials imported from Japan, between the furnace shell is equipped with air cooling system, can rise quickly cooling, &energy-saving equilibrium temperature field, low surface temperature and elevating temperature rate quickly, the advantages of energy saving, convenient take material, don’t need a crucible tongs stretch into the furnace, suitable for high temperature material taking and vacuum sintering in high temperature annealing is colleges and universities, research institutes, industrial and mining enterprises do powder sintering, ceramic sintering, glass melting, high temperature experiment, the ideal product quality inspection. https://www.nanoscienceandtechnology.co.in/nst-gn-6050-50l-200c-vacuum-dry-oven.htm https://www.nanoscienceandtechnology.co.in/nst-gn-6050-50l-200c-vacuum-dry-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 BATTERY 50L 200C VACUUM DRY OVEN (16.3 X 13.5 X 14.5″ ) WITH DIGITAL TEMPERATURE CONTROLLER   Features: Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications. 52 L Middle size vacuum chamber. 3″ (7.6 cm) glass wool insulation prevents heat loss from working chamber. Silicone door gasket and positive latch door maintain seal at all vacuum levels. Exclusive polycarbonate safety shield protects door glass. Vacuum fittings require .25″ (6.35 mm) I.D. tubing. Easy-to-clean #304 stainless steel chamber interior. Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance. Two removable stacking aluminum shelves included. CE certificated https://www.nanoscienceandtechnology.co.in/nst-dsp-30-920l-large-electric-convection-oven.htm https://www.nanoscienceandtechnology.co.in/nst-dsp-30-920l-large-electric-convection-oven.htm Tue, 12 Nov 2024 00:00:00 +0530 30-920L 300°C Max. Convection Oven with Programmable Temperature Controller NST-DSP is a 300°C Max. Ovens combine forced-air circulation and programmable temperature controller to achieve dependable, uniform furnace for a variety of laboratory applications like drying, storing, annealing. It is an ideal heating equipment for material R&D laboratories. https://www.nanoscienceandtechnology.co.in/nst-27l-512l-lithium-battery-electrode-vacuum-degassing-baking-oven.htm https://www.nanoscienceandtechnology.co.in/nst-27l-512l-lithium-battery-electrode-vacuum-degassing-baking-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 27L512L Lithium Battery Electrode Vacuum Degassing Baking Oven https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar2-double-drum-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar2-double-drum-vacuum-drying-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 Electrical Round Oven For Li-Ion Battery Electrode Drying The Round Vacuum Oven is dedicated to the Li-ion battery electrode drying process for producing. The vacuum oven working chamber is equipped with cylindrical cantilever, can hang the whole roll electrode, with maximum bearing weight up to 380 kg. The TMAX-JK-ZKHX-AR2 Round vacuum oven is equipped with two drums, you can also choose single drum, three drum or four drum according the battery production line output.   Air Supply Vacuum :-0.095~-0.1Mpa Compressed air :0.4~0.5Mpa Dry air :0.1~0.2Mpa https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar4-four-drum-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar4-four-drum-vacuum-drying-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 THE ROUND VACUUM OVEN is dedicated to the Li-ion battery electrode drying process for producing. The vacuum oven working chamber is equipped with cylindrical cantilever, can hang the whole roll electrode, with maximum bearing weight up to 380 kg.   The NST-JK-ZKHX-AR4 Round vacuum oven is equipped with four drums, you can also choose single drum, two drum according the battery production line output.   Air Supply Vacuum :-0.095~-0.1Mpa Compressed air :0.4~0.5Mpa Dry air :0.1~0.2Mpa   https://www.nanoscienceandtechnology.co.in/nst-zd3a-laboratory-150c-480l-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-zd3a-laboratory-150c-480l-vacuum-drying-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 150°C Larger Capacity (480L) Vacuum Drying Oven with Tri-level Shelf Heating Modules TMAX-ZD3A is a floor stand vacuum drying/degassing/bake-out oven with large capacity. It is manufactured with carefully selected UL/CSA/MET electrical components ( >24V DC/AC) which ensure the outstanding system performance and quality.   Advanced Features: Tri-level individual shelf heating modules provide ideal temperature uniformity, heat-up efficiency, and spacing for vacuum drying, degassing and bake-out applications. PLC control enables automatic cycling conditions such as vacuuming, backfill with an inert gas, heating to the set temp., dwell, timing and pressure control. Local temperature measuring for each heated shelf. The actual temperature of each shelf can be seen separately on the temperature controller.   Structure Total capacity: 480 liters (160 liters per level) Inner Chamber size: W660mm x D750mm x H330mm per level A good vacuum seal is achieved by silicone door gasket and positive latch door Three observation windows (15mm thick temper glass), one for each level High-quality glass wool insulation prevents heat loss and maintains a relatively low surface temp. < 40°C during the work Interior material: Stainless Steel 304 (3mm thick) Exterior material: Cold rolled steel plate (2mm thick)   Temperature Controller PID precise temperature controls with built-in over-temperature protection Temperature uniformity: +/-2°C @ 85°C Temperature Stability: +/-1°C of the setpoint   Gas Inlet/Vacuum Port Features 1/4″ tube fitting for chamber purging with inert gas Vacuum Port: KF-25 https://www.nanoscienceandtechnology.co.in/nst-dzf-6210-laboratory-215l-250c-digital-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-dzf-6210-laboratory-215l-250c-digital-vacuum-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 215L 250°C Vacuum Oven (22x25x24″ ) with Digital Temperature Controller & Inner Chamber – DZF-6210 TMAX-DZF-6210 is a middle size vacuum oven with max working temperature 250°C and 215 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-2.5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-dzf-6250-laboratory-252l-250c-small-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-dzf-6250-laboratory-252l-250c-small-vacuum-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 252L 250°C Vacuum Oven (28x24x24″ ) with Digital Temperature Controller & Inner Chamber – DZF-6250 TMAX-DZF-6250 is a middle size vacuum oven with max working temperature 250°C and 252 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-2.5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-laboratory-252l-larger-250c-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-laboratory-252l-larger-250c-vacuum-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 NST 252L 250°C Vacuum Oven (28x24x24″ ) with Digital Temperature Controller & Inner Chamber – DZF-6250 NST-DZF-6250 is a middle size vacuum oven with max working temperature 250°C and 252 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-2.5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-jk-dzf-6020-laboratory-25l-200c-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-jk-dzf-6020-laboratory-25l-200c-vacuum-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 25L 200C Vacuum Oven (12x12x11″ ) with Digital Temperature Controller – JK-DZF-6020 NST-JK-DZF-6020 is a middle size vacuum oven with max working temperature 200°C and 25 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Chamber and Door The chamber is structured with stainless steel and welded to bracing pieces. The inner Chamber size: 300 mm x 300 mm x 275 mm (12 x 12 x 11″, 25 Liter) A good vacuum sealing is achieved by the silicone gasket and the positive latch door. The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield. Two stainless steel shelves are included to facilitate processing efficiency.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-dzf-6020-laboratory-25l-250c-digital-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-dzf-6020-laboratory-25l-250c-digital-vacuum-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 25L 250°C Vacuum Oven (12x12x11″ ) with Digital Temperature Controller & Inner Chamber – DZF-6020 TMAX-DZF-6020 is a middle size vacuum oven with max working temperature 250°C and 25 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-2.5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-be-zk-laboratory-digital-vacuum-oven.htm https://www.nanoscienceandtechnology.co.in/nst-be-zk-laboratory-digital-vacuum-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 27L – 512L 200°C Vacuum Oven with Digital Temperature Controller & inner Chamber TMAX-BE-ZK is a middle size vacuum oven with max working temperature 200°C and 27 – 512 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Chamber and Door The chamber is structured with stainless steel and welded to bracing pieces. A good vacuum sealing is achieved by the silicone gasket and the positive latch door. The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield. Two stainless steel shelves are included to facilitate processing efficiency.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-kz50l-laboratory-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-kz50l-laboratory-vacuum-drying-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 53L 250°C Vacuum Oven (16x13x14″ ) with Digital Temperature Controller & inner Chamber TMAX-KZ50L is a middle size vacuum oven with max working temperature 250°C and 53 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.   Chamber and Door The chamber is structured with stainless steel and welded to bracing pieces. The inner Chamber size: 415 mm x 345 mm x 375 mm (16 x 13 x 14″, 53 Liter) A good vacuum sealing is achieved by the silicone gasket and the positive latch door. The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield. Two stainless steel shelves are included to facilitate processing efficiency.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-sbvo-03-lithium-battery-three-layer-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-sbvo-03-lithium-battery-three-layer-vacuum-drying-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 The NST-SBVO-03 vacuum oven is specially designed for lithium battery industry production process of vacuum drying equipment, the temperature, vacuum degree, the size of the studio and the barrier height is maximally meet the needs of the lithium battery industry.   This vacuum oven is manual vacuum and air control, it is mainly used for Lithium battery materials and electrode sheet vacuum baking.   Structure Three working chamber with one vacuum hole, controlled by hand separately Open door mode : Three single door, with square observe window With Air switch, over current protection, Over temperature protection. https://www.nanoscienceandtechnology.co.in/nst-dzf-6210-lithium-battery-vacuum-degassing-baking-oven.htm https://www.nanoscienceandtechnology.co.in/nst-dzf-6210-lithium-battery-vacuum-degassing-baking-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 1 The NST-DZF-6210 Vacuum Degassing Oven is a larger volume designed vacuum oven for industrial use. It has a 200 litres about 7.5 cubic feet volume.   2 The NST-DZF-6210 Vacuum Degassing Oven for lithium battery field mainly used for lithium battery materials, electrode and battery core vacuum drying for production line.   3 Use Vacuum Oven for material heating drying under vacuum states has advantages:   1 Can reduce the drying temperature   2 Avoid some objects heating to oxidation   3 Avoid heating air to kill living cells   4 No dust damage https://www.nanoscienceandtechnology.co.in/nst-sbvo-03ap-three-working-chamber-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-sbvo-03ap-three-working-chamber-vacuum-drying-oven.htm Mon, 06 Jul 2026 00:00:00 +0530 NST 150°C Larger Capacity (480L) Vacuum Drying Oven with Tri-level Shelf Heating Modules   NST-ZD3A is a floor stand vacuum drying/degassing/bake-out oven with large capacity. It is manufactured with carefully selected UL/CSA/MET electrical components ( >24V DC/AC) which ensure the outstanding.     https://www.nanoscienceandtechnology.co.in/nst-100-400-degree-c-convection-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-100-400-degree-c-convection-drying-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-100-400°C CONVECTION DRYING OVEN WITH DIGITAL TEMPERATURE CONTROLLER   Structure Use mirror stainless steel tank, four and a half circular arc transition, clapboard stents can free loading and unloading, easy to clean. Adopt PID fuzzy logic controller, quickly reached set Tem, more accurate and stable. Configuration independent limit temperature alarm system,exceed limit temperature automatically interrupted, security. Diameter of 50 mm hole is on the box left, easy to operation and measuring temperature. https://www.nanoscienceandtechnology.co.in/nst-gn-6050-battery-50l-200c-vacuum-dry-oven.htm https://www.nanoscienceandtechnology.co.in/nst-gn-6050-battery-50l-200c-vacuum-dry-oven.htm Sat, 30 Mar 2024 00:00:00 +0530 Features: Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications. 52 L Middle size vacuum chamber. 3″ (7.6 cm) glass wool insulation prevents heat loss from working chamber. Silicone door gasket and positive latch door maintain seal at all vacuum levels. Exclusive polycarbonate safety shield protects door glass. Vacuum fittings require .25″ (6.35 mm) I.D. tubing. Easy-to-clean #304 stainless steel chamber interior. Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance. Two removable stacking aluminum shelves included. CE certificated   Chamber and Door The chamber is structured with stainless steel and welded to bracing pieces. The inner Chamber size: 300 mm x 300 mm x 275 mm (12 x 12 x 11″, 25 Liter) A good vacuum sealing is achieved by the silicone gasket and the positive latch door. The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield. Two stainless steel shelves are included to facilitate processing efficiency.   Temperature Controller Single point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-0.1°C Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only   Attention It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality. Please do not place the sample on the chamber bottom directly. https://www.nanoscienceandtechnology.co.in/nst-110e-turbo-pumping-station.htm https://www.nanoscienceandtechnology.co.in/nst-110e-turbo-pumping-station.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-110E Turbo Pumping Station https://www.nanoscienceandtechnology.co.in/nst-620e-turbo-pumping-station.htm https://www.nanoscienceandtechnology.co.in/nst-620e-turbo-pumping-station.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-620E Turbo Pumping Station https://www.nanoscienceandtechnology.co.in/nst-700e-turbo-pumping-station.htm https://www.nanoscienceandtechnology.co.in/nst-700e-turbo-pumping-station.htm Mon, 06 Jul 2026 00:00:00 +0530 NST-700E Turbo Pumping Station https://www.nanoscienceandtechnology.co.in/nst-80-turbo-pumping-station.htm https://www.nanoscienceandtechnology.co.in/nst-80-turbo-pumping-station.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-80 Turbo Pumping Station https://www.nanoscienceandtechnology.co.in/nst-p10l-1000w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p10l-1000w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 10L COMPACT PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility, and wettability of these materials but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using a 13.56Mhz rf power supply can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   1000W 10L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens, and films; Biomedicine: Petri dishes enhance the activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/nst-p2l-1000w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p2l-1000w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-2L PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   1000W 2L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; https://www.nanoscienceandtechnology.co.in/nst-p5l-1000w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p5l-1000w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 5L PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   1000W 5L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/nst-p10l-100w-150w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p10l-100w-150w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST P10L PLASMA CLEAN is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   100W/150W 10L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/nst-p2l-100-150w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p2l-100-150w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 PLASMA CLEANING MACHINE divided into two types, atmospheric and vacuum; it is widely used in semi-conductor, PCB, medical diagnosis, elastomer industry, optical industry,etc.   NST generator has 40KHz, 13.56Mhz, and 2.45GHz. According to the usage, can choose the suitable NST. https://www.nanoscienceandtechnology.co.in/nst-p5l-100w-150w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p5l-100w-150w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 5L PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   100W/150W 5L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/nst-p10l-300w500w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p10l-300w500w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 10L PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   300W / 500W 10L plasma cleaner application fields: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/nst-p2l-300w-500w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p2l-300w-500w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-2L PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   2L plasma cleaning machine applications: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; https://www.nanoscienceandtechnology.co.in/nst-p5l-300w500w-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-p5l-300w500w-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 5L OXYGEN PLASMA CLEANER is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short-time cleaning can completely clean the organic pollutants.   In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials.   This plasma cleaner is suitable for laboratory and small-scale production. Using 13.56Mhz rf power supply, can be used to match a variety of commonly used gas plasma. There are a variety of common specifications for RF power supply from 100W to 1000W, which can meet the diverse needs of users.   300W/500W 5L Oxygen plasma cleaner applications: Metal: remove oil, greasy dirt and other organic matter and oxide layer on the metal surface; Automotive manufacturing: used for pre-treatment of plastics and paint spraying in automotive manufacturing processes; Textile production: used for the hydrophilicity, hydrophobicity and surface modification of textiles, filter screens and films; Biomedicine: Petri dishes enhance activity, vascular stents, syringes, catheters and pro-wetting of various materials, before cross-coating treatment; Aerospace: surface coating pretreatment of insulating materials, electronic components, etc.; Electronics: circuit board cleaning and etching. Non-oxidation and activation treatment of PP and other materials, to improve solderability; Semiconductor industry: wafer processing and processing to remove photoresist, pre-package pretreatment; LED: Pre-treatment before the bracket is cleaned and packaged; Plastic rubber: Improve the surface activity of PS, PE, PTFE, TPE, POM, AS and PP, making it easy to bond and print. https://www.nanoscienceandtechnology.co.in/lab-compact-uv-ozone-cleaner.htm https://www.nanoscienceandtechnology.co.in/lab-compact-uv-ozone-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 LAB COMPACT UV-OZONE CLEANER WITH 6″×6″ CHAMBER Lab compact UV-ozone cleaner’s cleaning effect is caused by irradiating the surface of a substrate with suitable lamps creating enough energy in the in the Ultra Violet spectrum range. It is photo-sensitized oxidation process by atomized Oxygen and high reactive Ozone. The UV radiation directly to the surface stimulates the reaction. Volatile hydrocarbon products are produced. The removal of hydrocarbons in nanometer thickness by oxidation results in ultra clean surfaces with significantly wettability. This is very important before thin film coating process of glass and ceramic surfaces.   Lab compact UV-ozone cleaner main features: To remove a variety of contaminants from surfaces of substrates samples. Use the dry process to clean surfaces with the highly effective method. Generate energy at wave line between 254nm to 185nm. There are Oxygen inlet port, Ozone removal pump, and LCD display unit. Sample temperature measurement feature. Buzzer for indicating completion of cleaning. Locking feature for locking sample feeding tray to avoid opening during operation.   UV Lamp UV lamp power: 120W Max. Wave length: 254 nm and 185 nm Max substrate size: 150×150 mm (6″×6″)   Chamber & Sample Stage Tray size: 176mm×168mm Sample feeding: slide based   Applications: Cleaning molecular contamination from SPTs, AFM tips, and surfaces Curing UV-adhesives UV-photopatterning of SAM surfaces Oxidizing PDMS Surface sterilization Etch, pattern, sharpen Clean MEMS devices Clean substrate surfaces such as Si, Ge, GaAs and all oxide crystal  substrate https://www.nanoscienceandtechnology.co.in/nst-ultra-low-temperature-atmospheric-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-ultra-low-temperature-atmospheric-plasma-cleaner.htm Mon, 06 Jul 2026 00:00:00 +0530 ULTRA-LOW TEMPERATURE ATMOSPHERIC PLASMA CLEANER utilizes the characteristics of plasma to clean, revitalite and activate the surface of solid materials that need to be treated, and the atmospheric plasma cleaner improves the surface adhesion, thereby achieving the purpose of changing the surface microstructure, chemical properties and energy.   Plasma – the fourth state of the material that is not mysterious!   There are solid, liquid, and gaseous substances that we are very familiar with in nature. By continuously providing energy to the substance, the temperature of the substance will rise, and the state of the substance will also be from “solid state→liquid state”, “liquid state→gaseous state”, “gaseous state→plasma state”.   The substance is made up of atoms, which consist of a positively charged nucleus and a negatively charged electron that surrounds the nucleus. When the energy is continuously supplied and heated to a sufficiently high temperature, the outer electrons are detached from the nucleus and become free electrons. This process is called “ionization”; and the substance becomes a positively charged nucleus and a negatively charged electron. Of course, there are also active groups, excited states of nuclides (meta-stable), photons, etc., which are a uniform “paste”, so the plasma is also called plasma. In plasma, the total amount of positive and negative charges is equal, so the overall is electrically neutral, called plasma.   Plasma is a state of high energy instability. Utilizing this high energy and unstable state, plasma has a variety of applications.   Ultra-low temperature atmospheric plasma cleaner principle: Etching on the surface of the material – physical effect A large number of active particles in the plasma, such as a large number of ions, excited molecules, and free radicals, act on the surface of the solid sample, which not only removes the original contaminants and impurities, but also produces an etching effect to roughen the surface of the sample and form many fine pits, which increases the specific surface of the sample,improves the wetting properties of solid surfaces.   Activation bond energy, cross-linking The energy of the particles in the plasma is between 0 and 20 eV, and most of the bond energy in the polymer are between 0 and 10 eV. Therefore, after the plasma acts on the solid surface, the original chemical bond on the solid surface can be broken. Free radicals in the plasma form a network of crosslinked structures with these bonds, greatly activating surface activity.   Formation of new functional groups – chemical action If a reactive gas is introduced into the electric discharge gas, a complicated chemical reaction occurs on the surface of the activated material, and new functional groups such as hydrocarbonyl, amidogen, carboxyl group, and the like are introduced, and these functional groups are all active groups, which can significantly improve the surface activity of the material.   Ultra-low temperature atmospheric plasma cleaner structure: Plasma cleaner is mainly composed of two parts: First, the plasma generator is composed of integrated circuit, operation control, plasma generating power source, gas source processing, and safety protection. Second, the plasma processing apparatus is composed of an excitation electrode, an excitation gas path, and the like.   Ultra-low temperature atmospheric plasma cleaner technical advantages: German circuit technology: It adopts German high-voltage excitation power circuit technology to generate high-density plasma and ensure superior cleaning results.   Comprehensive security protection: Over temperature, overload, abnormal air pressure, short circuit, wrong operation, and other comprehensive alarm protection.   Patented discharge technology: Special treatment and special structure of the discharge device, leading atmospheric glow discharge technology.   Great processing width: Solve the problem of large-width sample cleaning, up to 2 https://www.nanoscienceandtechnology.co.in/nst-glass-optical-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-glass-optical-plasma-cleaner.htm Mon, 06 Jul 2026 00:00:00 +0530 Glass optical plasma cleaner performance advantages: German circuit technology: It adopts German high-voltage excitation power circuit technology to generated high-density plasma and ensure superior cleaning results.   Comprehensive security protection: Temperature safety protection function, overload protection function, air pressure abnormality protection function, short circuit breaking alarm protection function, various misoperation protection functions.   Unique discharge technology: Special treatment and special structure of the discharge device ensure a stable and uniform plasma.   Production with assembly line: According to the user’s site requirements, the optimal assembly line production plan is configured to greatly improve production efficiency.   Quality product parts: All the components of the product are made of top quality parts at home and abroad to ensure superior equipment performance.   Low temperature cleaning: Meet the temperature requirements of different occasions, no temperature effect on the cleaning products. Imported precision CNC machine tool processing technology, and equipped with imported three-coordinate measuring instrument for quality monitoring.   https://www.nanoscienceandtechnology.co.in/desktop-uv-ozone-cleaner.htm https://www.nanoscienceandtechnology.co.in/desktop-uv-ozone-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 NST DESKTOP UV OZONE CLEANER has proven to be highly effective for non-acidic, dry, non-destructive atomic cleaning and removal of organic contaminants using intense 185 nm and 254 nm UV light. Under air and room temperature, the 185 line produces Ozone and while the 254 line excites organic molecules on the surface. This combination drives the rapid destruction and decimation of organic contaminants.   Environment Requirement Indoor Use Only; Altitude Use Up To 5,500 Feet; Temperature Range 41-104 Degrees Fahrenheit; Maximum Relative Humidity 80%, Up To 87 Degrees Fahrenheit Decreasing Linearly to 50% Relative Humidity At 104 Degrees Fahrenheit; Main power supply fluctuations not to exceed 10% of the nominal voltage; overvoltage category II; Pollution Degree 2; ozone level (ambient) measurement at <45 ppb.   UV   Lamp Solid metal double wave mercury lamp Wave Length: 253.7nm and 184.9nm UV lamp service life: 5000 hrs UV light area: 200×200 mm Can clean crystal wafer with diameter up to 12“   Chamber & Sample Stage Stainless steel case Sliding drawer for easy sample loading Sample stage area is 310 mm×320 mm (12″×12″ ) Ozone venting device is built in the chamber Timer ranges from 0.01 seconds to 99.9 hours.   Heatable Sample Stage Sample stage is heatable up to 150℃ with precision temperature controller Temperature controller is 20 segments programmable with +/-2℃ accuracy Temperature uniformity:<10℃ within 6 inches diameter area; <20℃ within 12 inches diameter Heating rate: 15℃ max. The distance between sample stage and lamp is adjustable from 20mm to 40mm.   Vent Port 3 in. diameter vent port is built in the back of the machine One 10 ft. flexible pipe and one vent clamp are included for connecting the cleaner exhaust to a lab venting system.   Application Clean silicon wafer, Gallium Arsenide wafer, quartz and ITO glass Clean all types of oxide single crystal substrate such sapphire, STO, and LAO. Clean gold and Pt surface Oxidizing surface of light metallic material Activate Polymers and Crosslink Polymers UV Strip Photo Resist / Photoresist UV Clean Production Line LED displays   https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-diffusion-pumping-system.htm https://www.nanoscienceandtechnology.co.in/nst-high-vacuum-diffusion-pumping-system.htm Sat, 30 Mar 2024 00:00:00 +0530 NST BASED HIGH VACUUM PUMPING SYSTEM are used in both laboratory and industrial applications. The standard Vacuum Pumping Systems consists of Rotary Vacuum Pump, Diffusion pumps and other hardware like valves, baffles, collar, gauge and plumbing lines etc., fully integrated and wired. Special Vacuum Pumping Systems are offered with Rotary Pumps, Root Pumps & Diffusion pumps or combination as per customer requirements, Auto Manual Valves, Modular Structure etc The Vacuum Pumping Systems, are trolley mounted with castor wheel for easy movement, and are capable of achieving an ultimate vacuum of 10-6 m.bar. Liquid nitrogen trap given as optional is to minimize the back-streaming of oil vapors, and ensures clean and better ultimate vacuum of 10-6m.bar range. The vacuum pumping systems are fitted with Pirani Gauge to measure the roughing and backing vacuum & Penning gauge for measuring the high vacuum. Option is available for Digital & Analogue type of gauges.   Features: All components easily accessible Compact construction Simple operation Allows direct connection of Vacuum Chamber Pumping speed ranging from 120 lps to 3000 lps Ultimate (Unbaffled) vacuum better than 10-6 m bar (with LNT) D.P., baffles, valves, collar & plumbing are S.S. construction Optional      Optional accessories Liquid Nitrogen Trap given as optional. Water Cooled Chevron Baffle given as optional. Electro pneumatically operated valve. (Butterfly valve, Rightangle Valve) Push buttons, automatic versions are available on request https://www.nanoscienceandtechnology.co.in/nst-adjustable-micrometer-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-adjustable-micrometer-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 NST Adjustable Micrometer Film Applicator with Digital Display-200mm Width   Micrometer Adjustable Film Applicator With Digital Display Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment. The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 100 mm standard width or customized width Make wet film thickness between 0 – 3500 microns Micrometer head’s controllable accuracy is 10 microns Made of SS304 stainless steel https://www.nanoscienceandtechnology.co.in/tmax-applicator-2-adjustable-wet-film-applicator.htm https://www.nanoscienceandtechnology.co.in/tmax-applicator-2-adjustable-wet-film-applicator.htm Sat, 30 Mar 2024 00:00:00 +0530 Adjustable Wet Film Applicator With Digital Display Micrometer   Description: This wet film applicator features micrometer heads for knife blade thickness adjustment.  The operator sets the blade clearance by adjusting the micrometers. It is excellent tool to For laboratory research with quality film for material research, to make ceramic tape casting,battery electrodes, and various coating at lower cost. https://www.nanoscienceandtechnology.co.in/nst-tm-150kt-micrometer-adjustable-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-tm-150kt-micrometer-adjustable-film-applicator.htm Sat, 30 Mar 2024 00:00:00 +0530 Micrometer Film Applicator with Adjustable Width 0 – 150 mm This unique wet film applicator features adjustment.for both of thickness and width. The operator sets the blade clearance by adjusting the micrometers, and sets up film width to be coated by adjusting blade width. This is an excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 0 – 150 mm adjustable width. Make wet film thickness between 0 – 4500 microns. Micrometer head’s controllable accuracy is 10 microns. https://www.nanoscienceandtechnology.co.in/nst-tm-150-double-blade-micrometer-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-tm-150-double-blade-micrometer-film-applicator.htm Fri, 09 May 2025 00:00:00 +0530 Double Blade Micrometer Film Applicator With Width of 150 mm NST-TM-150Double is a double blade wet film applicator with adjsutmentable thickness, which can make film casting more uniform. This is an excellent tool to make higher quality film for tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: Two blades with adjustable height from 0 – 6 mm; Width: 150 mm; Make wet film thickness between 0 – 6000 microns; Micrometer head’s controllable accuracy is 10 microns. https://www.nanoscienceandtechnology.co.in/nst-100-battery-micrometer-adjustable-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-100-battery-micrometer-adjustable-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 Battery Micrometer Adjustable Film Applicator – 100 mm Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment.    The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 100 mm standard width Make wet film thickness between 0 – 3500 microns Micrometer head’s controllable accuracy is 10 microns  Made of SS304 stainless steel https://www.nanoscienceandtechnology.co.in/nst-cn-150-150-tape-casting-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-cn-150-150-tape-casting-film-coating-machine.htm Tue, 15 Oct 2024 00:00:00 +0530 NST Compact Tape Casting Coater w/ Vacuum Chuck (8″Wx14″L), Film Applicator & Optional 200ºC Dryer Cover   This product is widely used in various high-temperature coating research, such as ceramic film, crystal film, battery material film, special nano-film, and can adapt to the future development of high-temperature film-forming technology. Digital display temperature control drying system, the highest working temperature is 200 C; Digital display timer, which can set the drying time freely; The film speed can be adjusted in the range of 0-200 mm/s. Vacuum aluminium disc, which can quickly place or remove the substrate; The stroke can be adjusted by a stroke switch between 10 and 500 mm. Scraper with adjustable film thickness (accuracy 0.01mm); Small size can save space. Fine appearance, three-dimensional geometric design of sheet metal, concise and beautiful; https://www.nanoscienceandtechnology.co.in/nst-battery-film-coating-machine-with-adjust-doctor-knife.htm https://www.nanoscienceandtechnology.co.in/nst-battery-film-coating-machine-with-adjust-doctor-knife.htm Mon, 06 Jul 2026 00:00:00 +0530 This coating machine is used for lithium ion battery cathode /anode electrode coating with dry function, suitable for lithium ion battery lab research. https://www.nanoscienceandtechnology.co.in/nst-vfc-150-automatic-lab-vacuum-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-vfc-150-automatic-lab-vacuum-film-coating-machine.htm Mon, 06 Jul 2026 00:00:00 +0530 Specifications： The NST-VFC-150 FILM COATING MACHINE WITH DRYER is used for varies kinds of materials coating.  It is supplied with internal vacuum pump and heating system, having an precision heating temperature up to 200°C. The film coating machine is mainly used for lithium battery electrode coating for coin cell assemble and pouch cell research.   Heating System & Applicator Built in digital temperature controller with accuracy of +/-1°C2 Heating system : Installed on the top cover. Suspension support helps open cover easily and safely. Max. Heating Rate:10°C/min Max. Heating Temp.:200°C   One 150mm width micrometer adjustable film applicator is included  Traverse Pusher is included for pushing the Film Applicator to ensure the constant coating speed https://www.nanoscienceandtechnology.co.in/nst-lab-electrode-coater-with-vacuum-chuck-doctor-blade.htm https://www.nanoscienceandtechnology.co.in/nst-lab-electrode-coater-with-vacuum-chuck-doctor-blade.htm Mon, 06 Jul 2026 00:00:00 +0530 AUTOMATIC FILM COATER WITH 8″W X 13″L VACUUM CHUCK & 180MM DOCTOR BLADE NST-JK-TMJ-220A is a CE Certified Automatic Film Coater with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a unique driving system to produce the smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when coating on the thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating.   Accessories: Film Applicator Optional 50 upto 180 mm width micrometer film applicator is included, with adjustable thickness from 0.02 mm – 2 mm Traverse Pusher is included for pushing the doctor blade to ensure constant speed coating Note: Thinnest film can be achieved is > 20 micron   Platform Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 320mm(L) x 200mm(W) https://www.nanoscienceandtechnology.co.in/nst-customizable-hot-melt-glue-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-customizable-hot-melt-glue-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 This coating machine is suitable for all kinds of paper/cloth/leather/PET/aluminum foil/copper foil, etc. https://www.nanoscienceandtechnology.co.in/nst-100-500mm-custom-laboratory-compact-doctor-blade-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-100-500mm-custom-laboratory-compact-doctor-blade-coating-machine.htm Tue, 15 Oct 2024 00:00:00 +0530 NST-100-500mm Custom Laboratory Compact Doctor Blade Coating Machine https://www.nanoscienceandtechnology.co.in/nst-beeswax-custom-laboratory-bees-wax-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-beeswax-custom-laboratory-bees-wax-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-BeesWax Custom Laboratory Bees Wax Coating Machine https://www.nanoscienceandtechnology.co.in/nst-tb300-automatic-roll-to-roll-continuous-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-tb300-automatic-roll-to-roll-continuous-film-coating-machine.htm Mon, 06 Jul 2026 00:00:00 +0530 Laboratory coating machine is a new laboratory instrument developed in recent years. It is a successful innovation combining electrical control and mechanical organic. In the field of coating production, it can save a lot of raw materials and improve production technology. The key is to greatly improve the reproducibility of coating on the basis of experiments. It is specially designed and manufactured for the research and development and material inspection of battery materials in universities, research institutes and enterprise laboratories.   The equipment is mainly suitable for the coating process of positive and negative electrodes of lithium iron phosphate, lithium cobalt oxide and lithium manganate.   https://www.nanoscienceandtechnology.co.in/tmax-applicator-adjustable-micrometer-film-applicator.htm https://www.nanoscienceandtechnology.co.in/tmax-applicator-adjustable-micrometer-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 ADJUSTABLE MICROMETER FILM APPLICATOR WITH DIGITAL DISPLAY-200MM WIDTH Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment. The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 200 mm standard width or customized width Make wet film thickness between 0 – 3500 microns Micrometer head’s controllable accuracy is 10 microns Made of SS304 stainless steel https://www.nanoscienceandtechnology.co.in/nst-h200t-lab-automatic-mini-tablet-film-coater.htm https://www.nanoscienceandtechnology.co.in/nst-h200t-lab-automatic-mini-tablet-film-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 200C MAX. COMPACT LAB AUTOMATIC MINI TABLET FILM COATER( 10″WX16″L ) FOR BATTERY ELECTRODE COATING   NST-H200T is an NRTL standard Compact Tape Casting Coater with the vacuum chuck hotplate up to 200ºC and the active carbon filter on the top cover to protect lab environment. It is an excellent tool to make high-temperature polymer coating or conductive ceramic film on various substrates. https://www.nanoscienceandtechnology.co.in/nst-200c-max-automatic-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-200c-max-automatic-film-coating-machine.htm Mon, 06 Jul 2026 00:00:00 +0530 200ºC MAX. AUTOMATIC FILM COATER WITH DRYER COVER AND 140MM DOCTOR BLADE   TMAX-JK-TMJ-200 is a CE Certified ready compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 140 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 200°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating. https://www.nanoscienceandtechnology.co.in/nst-psc180g-desktop-plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-psc180g-desktop-plasma-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 This type of SMALL PLASMA SPUTTERING COATING MACHINE adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage.This small plasma sputtering coater uses PLC control system, all touch screen operation, easy to learn and use. This model machine is also equipped with a rotatable sample stage, which can effectively improve the uniformity of the coating. This small plasma sputtering instrument uses a PLC control system, all touch screen operation, easy to learn and use. The equipment is small in size and beautiful in appearance, making it the best choice for laboratory coating experiments. https://www.nanoscienceandtechnology.co.in/nst-psp180g-3ta-three-target-heads-plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-psp180g-3ta-three-target-heads-plasma-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST THREE TARGET HEADS PLASMA SPUTTERING COATER is a cost-effective plasma sputter coating equipment independently developed by our company. The plasma sputtering target is a standard size of 2 inches. Customers can choose different configurations of 1~3 target heads according to their needs to meet the different experimental needs of single-layer film or multilayer films of various materials. The instrument is equipped with a 150W DC high-voltage power supply, which can be used for metal sputter coating, especially for the coating of metals such as gold, silver and copper. This film coater is equipped with a gas connection for the introduction of protective gas. The instrument adopts touch screen control, which is simple and intuitive to use. It can realize the operation of coating start and stop, switch target head position and baffle rotation with one button, which is very suitable for laboratory purchase.   This film coater is equipped with a two-stage rotary vane vacuum pump. It has the advantages of small volume, quick vacuuming and simple operation. If customers need to further improve the vacuum degree, you can contact the technician to select the molecular pump group to form a high vacuum system.   Two target heads plasma sputtering coater application It can be used for metal sputter coating, especially for metal coatings such as gold, silver and copper. https://www.nanoscienceandtechnology.co.in/cy-evs180g-lv-small-two-in-one-coating-machine.htm https://www.nanoscienceandtechnology.co.in/cy-evs180g-lv-small-two-in-one-coating-machine.htm Tue, 15 Oct 2024 00:00:00 +0530 THE PLASMA SPUTTERING AND EVAPORATION TWO-IN-ONE COATING MACHINE is equipped with DC sputtering target and thermal evaporation assembly, which can not only be used for metal film plating by plasma sputtering, but also obtain carbon or other metal elemental films by evaporation. The instrument components are highly integrated, which realize two kinds of coating functions in the same chamber. This coating machine adopts high purity quartz chamber as vacuum chamber, and the coating process is completely visible. The instrument is equipped with two stage rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa, and can meet the vacuum environment required by most evaporation coating experiments and diode sputtering experiments. This instrument has small size which can save space and can be used on the test bench. One machine has multiple purposes, which is cost-effective and very suitable for major universities and research institutions to choose.   Small two-in-one coating machine applications: Scanning electron microscope sample surface gold spraying, gold steaming carbon spraying and other operations, as well as the production of non-conductor material test electrode. https://www.nanoscienceandtechnology.co.in/cy-psp180g-1ta-small-plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/cy-psp180g-1ta-small-plasma-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST THE SMALL PLASMA SPUTTERING COATER is a cost-effective plasma sputter coating equipment independently developed by our company. It has the advantages of compact structure, easy to use, high integration and strong sense of design. The plasma sputtering target is a standard size of 2 inches. The instrument is equipped with a 150W DC high-voltage power supply, which can be used for metal sputter coating, especially for the coating of precious metals such as gold, silver and copper. It is often used in the preparation of conductive films for laboratory scanning electron microscope samples. It is also called “gold spraying machine”. This film coater is equipped with a gas connection for the introduction of protective gas. If the customer needs to pass the mixed gases, the staff can be contacted to configure the high-precision mass flow meter to meet the experimental needs.   This film coater is equipped with a two-stage rotary vane vacuum pump. It has the advantages of small volume, quick vacuuming and simple operation. If customers need to further improve the vacuum degree, the technician can contact the technician to select the molecular pump group to form a high vacuum system. https://www.nanoscienceandtechnology.co.in/nst-desktop-magnetron-plasma-sputtering-coater-machine.htm https://www.nanoscienceandtechnology.co.in/nst-desktop-magnetron-plasma-sputtering-coater-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-SPUTTERING IS A COMPACT PLASMA SPUTTERING COATER designed for making metallic coatings, such as gold, platinum, Indium and silver etc. Especially for coating conductive gold film for SEM sample. The plasma sputtering coater is shipped with all necessary accessories for immediate use, including one sputtering head with gold sputtering target (gold cathode), Vacuum pump, stainless steel bellows and quick clamps.   Vacuum Accessories The followings are included: 156 L/m Double Stage Rotary Vane Vacuum Pump with vapor trap ( Max vacuum 10e-2 torr) Stainless steel bellows with KF16 adapter and quick clamps Two Stage Exhaust Filter on vacuum pump to eliminate oil vapor contamination One High purity Au target (57mm dia.x0.12mm, 4N) Optional: you may use a turbo pump to achieve 10E-5 torr vacuum by a turbo pump   Application Notes For the best film strength, please use plasma cleaner to clean sample surface before coating The system requires an Ar gas tank with pressure regulator which is not included sputtering head connects to high voltage. The operator must wear electric insulation gloves during operation. The sputtering coater can be placed into an Ar and N2 gas glove box for coating This model is not suitable for coating light metallic material such as Al, Mg and Zinc or Carbon target due to low energy. Please consider our Magnetron-sputtering coater or Carbon Evaporation Coating. https://www.nanoscienceandtechnology.co.in/msp300s-3nst-three-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/msp300s-3nst-three-target-magnetron-sputtering-coater.htm Fri, 09 May 2025 00:00:00 +0530 The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Three targets NST magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, the three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/msp300s-3dc-three-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/msp300s-3dc-three-target-magnetron-sputtering-coater.htm Fri, 09 May 2025 00:00:00 +0530 The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Three targets magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, and the like. Compared with similar equipment, this three targets magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/msp300s-2dc1rf-three-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/msp300s-2dc1rf-three-target-magnetron-sputtering-coater.htm Fri, 09 May 2025 00:00:00 +0530 The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Three targets magnetron sputtering coater application: This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, this three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/nst-msp180g-small-desktop-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-msp180g-small-desktop-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 THE MAGNETRON TARGET HEAD OF THE MAGNETRON SPUTTERING COATER has 1 inch and 2 inches to choose from. Customers can choose the target according to the size of the substrate to be plated. The device is equipped with 150W NST power supply, which can be used for metal sputter coating. The coating machine is equipped with gas inlet port for the introduction of protective gas. If the customer needs the mixed gases, the staff can be contacted to configure the high-precision mass flow meter to meet the experimental needs. The instrument is equipped with advanced turbomolecular pump set, the ultimate vacuum is up to 1.0E-5pa, and other types of molecular pumps are also available.   Small desktop single-target magnetron sputtering coater application: The device can be used to prepare single-layer ferroelectric thin films, conductive films, alloy films, and so on. Compared with similar equipment, the single-target magnetron sputtering coater is compact, highly integrated and small in size, and can be placed on a desktop. It is an ideal equipment for laboratory preparation of material films. https://www.nanoscienceandtechnology.co.in/msp300s-single-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/msp300s-single-target-magnetron-sputtering-coater.htm Fri, 09 May 2025 00:00:00 +0530 The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Single-target magnetron sputtering coater application: The device can be used to prepare single-layer ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, the single-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation. It is an ideal equipment for laboratory preparation of material films, especially suitable for research on solid electrolyte and OLED in the laboratory. https://www.nanoscienceandtechnology.co.in/msp300s-dc-single-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/msp300s-dc-single-target-magnetron-sputtering-coater.htm Mon, 06 Jul 2026 00:00:00 +0530 The coating machine has a two-channel high precision mass flow meter. If customers have other requirements, the gas path of up to four-channel mass flow meter can be customized to meet the complex gas environment requirements. The instrument is equipped with advanced turbo molecular pump group, and ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.   Single target magnetron sputtering coater application: This device can be used for preparing single-layer ferroelectric thin films, conductive films, alloy films, and the like. Compared with similar equipment, the single target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory. https://www.nanoscienceandtechnology.co.in/ultra-high-vacuum-thermal-evaporation-coater.htm https://www.nanoscienceandtechnology.co.in/ultra-high-vacuum-thermal-evaporation-coater.htm Mon, 06 Jul 2026 00:00:00 +0530 ULTRA-HIGH VACUUM THERMAL EVAPORATION COATER is equipped with 4 evaporation heating boats, each of which can be independently evaporation coating.There is a rotatable baffle above the heating boat. When one of the heating boats is working,the baffle will cover the other three tungsten boats to prevent contamination of the vapor deposition materials.If the partial configuration is changed, the evaporation coating of the organic material can be realized, which can meet the research requirements of the light-emitting device and the organic solar battery, and it is an experimental device with an ideal coating effect and high cost performance. https://www.nanoscienceandtechnology.co.in/nst-in-line-magnetron-sputtering-system.htm https://www.nanoscienceandtechnology.co.in/nst-in-line-magnetron-sputtering-system.htm Mon, 06 Jul 2026 00:00:00 +0530 NST-IN-LINE MAGNETRON SPUTTERING SYSTEM mainly consists of a loading sample chamber, a sputtering chamber, a output sample chamber, a substrate transfer mechanism, a pumping and vacuum measuring system, a gas circuit system, an electronic control system, and a mounting base. In addition, after the system is upgraded, it would be a 5 chamber structure: the loading sample chamber, 3 independent sputtering chambers, output sample chamber; Rf power supply is added to provide the function of preparing dielectric film and realize continuous coating.   https://www.nanoscienceandtechnology.co.in/nst-dual-head-high-vacuum-magnetron-plasma-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-dual-head-high-vacuum-magnetron-plasma-sputtering-coater.htm Mon, 06 Jul 2026 00:00:00 +0530 NST-DUAL-HEAD HIGH VACUUM MAGNETRON PLASMA SPUTTERING COATER is designed for coating both single or multiple film layers for a wide range of materials, such as alloy, ferroelectric, semiconductor, ceramic, dielectric, optical, PTFE, etc.Compared with similar equipment, it has the advantages of small size and easy operation, and a wide range of materials that can be used. It is an ideal equipment for preparing various types of material films in the laboratory. https://www.nanoscienceandtechnology.co.in/600-3hd-three-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/600-3hd-three-target-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 600-3HD THREE-TARGET MAGNETRON SPUTTERING COATER is a newly developed coating equipment, which can be used to prepare monolayer or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film, ceramic film, dielectric film, optical Film, oxide film, hard film, polytetrafluoroethylene film, and the like. Compared with similar equipment, it is not only widely used, but also has the advantages of small size and easy operation. It is an ideal equipment for laboratory preparation of material films, especially suitable for laboratory research on solid electrolytes and OLEDs. https://www.nanoscienceandtechnology.co.in/nst-5-inch-close-range-rotary-evaporation-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-5-inch-close-range-rotary-evaporation-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-5-INCH CLOSE-RANGE ROTARY EVAPORATION COATING FURNACE is a rapid thermal processing furnace with 11″ I.D. quartz chamber. It is designed for Thermal Evaporating or CSS (Close Spaced Sublimation) film coating up to 5″ Dia. circular samples and 800°C Max. The furnace is heated by two group of halogen heaters (Top and Bottom) separately with max. 10℃/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is an excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskite solar cell. https://www.nanoscienceandtechnology.co.in/nst-dyg-135-roll-coating-laminating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-dyg-135-roll-coating-laminating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 Advantages Scraping system, parts processing precision, slurry contact part stainless steel structure, scraping thickness adjustable. Main transmission adopts frequency control of motor speed,wide speed range speed constant and reliable for the speed control system, constant torque Drying box adopts far infrared heating pipe, high heat efficiency, long service life Using hot air circulation system, can make the temperature uniform,not easy to burn the pole piece Temperature control adopts PID control system, high control accuracy, reliable work The reeling adopts automatic correction system, pole piece coiling system https://www.nanoscienceandtechnology.co.in/nst-tmj-180c-roll-to-roll-continuous-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-tmj-180c-roll-to-roll-continuous-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 THE NST-TMJ-180C DESKTOP CONTINUOUS COATING MACHINE is a small roll to rolling coating machine for lab research, it is assembled by high high precision coating device, suitable for institutions, university and factory pilot scale battery research work.   https://www.nanoscienceandtechnology.co.in/nst-ms-gd200-small-battery-film-coater-machine.htm https://www.nanoscienceandtechnology.co.in/nst-ms-gd200-small-battery-film-coater-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 NST SMALL BATTERY FILM COATER MACHINE OF 200 ° C FOR LITHIUM BATTERY   The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. The coating head is made of stainless steel U-shaped scraper, which simulates the large coating head to ensure that the experimental product matches the quality of the production coating. The coating head can be quickly opened to clean the blade after each experiment.   The laboratory small coaters all use high-quality accessories, and the price is excellent. It has won many R&D institutions of multinational corporations and is favored by many famous universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments. https://www.nanoscienceandtechnology.co.in/nst-mrx300-roll-to-roll-transfer-coating-system.htm https://www.nanoscienceandtechnology.co.in/nst-mrx300-roll-to-roll-transfer-coating-system.htm Thu, 08 May 2025 00:00:00 +0530 NST-MRX300 is a automatic battery electrode coating system with a compact footprint that is less than 6’x3′. It uses transfer coating technique for better coating uniformity and is perfect for research or building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries. It is integrated with the functions/ features of metallic foil roll unwinding (reeling out), slurry feeder, coating blade, baking oven, and final electrode winding (reeling in) together with touch screen operation for customer’s the most convenience.   Max. Coating Length Depending on the coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run.   Coating Modes Using transfer coating technique ( Reverse comma )  for better uniformity Two available coating modes selectable on the control panel. Continuous mode Intermittent coating ( system performs coating, stops, coats again and so on. The length of the coating and break segments can be specified by the user ).   Warranty Two Years limited warranty with lifetime support. Rusting and damage due to improper storage condition or maintenance are not covered by warranty. https://www.nanoscienceandtechnology.co.in/nst-tb300-roll-to-roll-transfer-coating-system.htm https://www.nanoscienceandtechnology.co.in/nst-tb300-roll-to-roll-transfer-coating-system.htm Thu, 08 May 2025 00:00:00 +0530 NST-TB300 is a CE Certified  and UL ready automatic battery electrode coating system. It uses transfer coating technique for better coating uniformity and is perfect for research or building prototypes (e.g. pilot scalestudies) of new generation rechargeable batteries. It is integrated with the functions/ features of metallic foil roll unwinding (reeling out), slurry feeder, coating blade, baking oven, and final electrode winding (reeling in)together with touch screen operation for customer’s utmost convenience.   Max. Coating Length Depending on the coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrodelength coated per run.   Coating Modes Using transfer coating technique (Doctor Blade Coating)  for better uniformity. Two available coating modes selectable on the control panel. Continuous mode. Intermittent coating ( system performs coating, stops, coats again and so on.The length of the coating and break segments can be specified by the user ). https://www.nanoscienceandtechnology.co.in/nst-laboratory-compact-film-coater.htm https://www.nanoscienceandtechnology.co.in/nst-laboratory-compact-film-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 Laboratory Compact Film Coater With Infinitely Variable Speed   Features The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. 4. Spread the bed for a flat glass.   The laboratory small coaters all use imported accessories, and the price is excellent. It has won many R&D institutions of multinational corporations and is favored by many famous universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments. https://www.nanoscienceandtechnology.co.in/nst-tm-lab-large-automatic-film-coater.htm https://www.nanoscienceandtechnology.co.in/nst-tm-lab-large-automatic-film-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 Lab Large Automatic Film Coater with Vacuum Chuck and Adjustable Doctor Blade NST-TM  is a CE Certified Large Automatic Film Coater with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a unique driving system to produce the smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when coating on the thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating.   The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. 4. Spread the bed for a flat glass. https://www.nanoscienceandtechnology.co.in/nst-xt-200ca-lab-compact-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-xt-200ca-lab-compact-film-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 Lab Compact Film Coating Machine with 300mm Width Wire Bar NST-XT-200CA Film coating machine is lab Automatic Film Coater with glass bed as coating plate. It adopts OSP precision wire rod to with a larger range of coating range. This lab coating machine can be used for research on ceramic tape casting. crystal film, special nanometer film and Li-Ion battery electrode coating.   This Wire rod coating machine adopts precision extrusion type coating measuring rods coated film (the thinnest film coating thickness up to 1.5 um). It also can be used for Paper printing, film, adhesive tape production. https://www.nanoscienceandtechnology.co.in/nst-tmh-lab-compact-film-coater-machine-with-vacuum-chuck.htm https://www.nanoscienceandtechnology.co.in/nst-tmh-lab-compact-film-coater-machine-with-vacuum-chuck.htm Sat, 30 Mar 2024 00:00:00 +0530 NST Lab Compact Film Coater Machine with Vacuum Chuck It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 100 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 100°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.   Heating Cover Pre-installed on the top cover Built in digital temperature controller with accuracy of +/-1°C Suspension support helps open cover easily and safely Max. Heating Temp.: 200°C https://www.nanoscienceandtechnology.co.in/nst-meltglue-customizable-hot-melt-glue-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-meltglue-customizable-hot-melt-glue-coating-machine.htm Mon, 06 Jul 2026 00:00:00 +0530 THIS COATING MACHINE IS SUITABLE FOR ALL KINDS OF PAPER/CLOTH/LEATHER/PET/ALUMINUM FOIL/COPPER FOIL, ETC. https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-50-micrometer-adjustable-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-50-micrometer-adjustable-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 Micrometer Adjustable Film Applicator – 50 mm Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment.   The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 50 mm standard width Make wet film thickness between 0 – 6000 microns Micrometer head’s controllable accuracy is 10 microns Made of SS304 stainless steel https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-150-micrometer-adjustable-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-150-micrometer-adjustable-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 Micrometer Adjustable Film Applicator – 150 mm Width Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment. The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features: 150 mm standard width. Built in slurry guiding plate to make coating material evenly distributed ahead blade. Make wet film thickness between 10 – 5000 microns. Micrometer head’s controllable accuracy is 10 microns. Slurry Capacity: 60 ml.   https://www.nanoscienceandtechnology.co.in/nst-afa-iii-lithium-battery-slurry-electrode-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-afa-iii-lithium-battery-slurry-electrode-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 Portable and flexible  For laboratory equipment Materials   This equipment is for small coating in the laboratory,can finish the cathode/anode coating and do the first baking.It’s portable and flexible,is the ideal equipment for laboratory. https://www.nanoscienceandtechnology.co.in/nst-w1-li-ion-battery-electrode-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-w1-li-ion-battery-electrode-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 Summarization: This equipment is for small coating in the laboratory,can finish the cathode/anode coating and do the first baking.It’s portable and flexible,is the ideal equipment for laboratory.   Main characteristic: adopt the electric heating and heat conduction,unique large heating,to make sure the high precision and uniform heating, Use of water vapor own characteristic, let the automatic discharge, beardless another power, energy conservation and environmental protection. Coating speed 0~100mm/s,can adjust.The vacuum plate can quickly place or take down cupper foil,aluminium foils ,etc. Reduction motor stepless variable speed, equipped with vacuum aluminum plate and temperature and time of the digital display. https://www.nanoscienceandtechnology.co.in/nst-ms-zn300-laboratory-compact-bar-coater.htm https://www.nanoscienceandtechnology.co.in/nst-ms-zn300-laboratory-compact-bar-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 The biggest advantage of the film coating machine is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. The coating head is made of stainless steel U-shaped scraper, which simulates the large coating head to ensure that the experimental product matches the quality of the production coating. The coating head can be opened quickly at 90 degrees to clean the blade after each experiment.   The laboratory small coating machine all adopts high-quality accessories, and the price is excellent and cheap. It has won the favor of many multinational enterprise R&D institutions and many well-known universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments. https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-150d-double-blade-micrometer-film-applicator.htm https://www.nanoscienceandtechnology.co.in/nst-eq-se-ktq-150d-double-blade-micrometer-film-applicator.htm Mon, 06 Jul 2026 00:00:00 +0530 EQ-SE-KTQ-150D IS A DOUBLE BLADE WET FILM APPLICATOR WITH ADJSUTMENTABLE THICKNESS, which can make film casting more uniform. This is an excellent tool to make higher quality film for tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.   Features Two blades with adjustable height from 0 – 6 mm; Width: 150 mm; Make wet film thickness between 0 – 6000 microns; Micrometer head’s controllable accuracy is 10 microns. https://www.nanoscienceandtechnology.co.in/nst-jy300-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-jy300-coating-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 Battery Production Slit Extrusion Slot Die Electrode Coating Machine For Continuous Coating And Intermittent Coating   Features: Can achieve continuous, intermittent and other shapes of coating; Slit extrusion coating method, high coating precision and good coating consistency; Substrate tension control, stable belt, configuration of correcting device; Hot air oven, double-sided airing on the top and bottom, good drying effect; PLC control, touch screen operation, easy to use; Coating equipment size and weight: size L1800*W1050*H1300mm Weight: about 600KG   mounting castor foot   Installation environment requirements The ambient temperature of the machine head is 25~30°C, and the rest is 10~40°C; The relative humidity of the machine head is RH ≤ 35%, the negative electrode RH ≤ 98%, and the rest ≤ 98%;   Supporting facility Power supply: 3PH 380V, 50HZ, voltage fluctuation range: +8%~–8%; power supply total power 10KW; Compressed air: after drying, filtering and voltage regulation: the outlet pressure is greater than 5.0kg/cm2; https://www.nanoscienceandtechnology.co.in/nst-dyg-135-automatic-powder-lithium-ion-battery-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-dyg-135-automatic-powder-lithium-ion-battery-coating-machine.htm Mon, 06 Jul 2026 00:00:00 +0530 THE LITHIUM BATTERY COATING MACHINE NST-DYG-135 MODEL COATING MACHINE is mainly used for Slurry drying process of lithium battery electrode coating. The battery coating machine adopts continuous coating mode, is mainly used for lithium battery lab research and pilot scale production line.    The process can be used to replace the original hand-scraping pulp, oven drying operation, and improve the uniformity of the squeegee and drying efficiency, is an indispensable equipment in mass production.   Advantages: Scraping system, parts processing precision, slurry contact part stainless steel structure, scraping thickness adjustable. Main transmission adopts frequency control of motor speed, wide speed range speed constant and reliable for the speed control system, constant torque. Drying box adopts far infrared heating pipe, high heat efficiency, long service life. Using hot air circulation system, can make the temperature uniform, not easy to burn the pole piece. Temperature control adopts PID control system, high control accuracy, reliable work. The reeling adopts automatic correction system, pole piece coiling system. https://www.nanoscienceandtechnology.co.in/nst-sc1-anti-corrosion-spin-coater.htm https://www.nanoscienceandtechnology.co.in/nst-sc1-anti-corrosion-spin-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 Anti-Corrosion Spin Coater ( 8000 RPM & 6″ wafer Max.) with Complete Accessories   Structure Case and spin disk made of Polypropylene (PP) to resist most of the corrosive solutions. Digital control box is separated from spin coater. One filter is included in standard package. It is used to connect the pump and coater for preventing waste water from flowing into the pump.   Input Power Default 220VAC, 50/60Hz,  single phase, 1000W Max. 110V is available in optional bar ( with 1500W transformer ) A power socket on the back of the Digital control box is used to supply power to the vacuum pump. (The output voltage of this power outlet depends on the input voltage of the spin coater, e.g. if the spin coater is plugged into AC 110V, this power socket will supply AC 110V.)   Chamber  & Vacuum Chuck Chamber diameter:  150 mm PP anti-corrosive vacuum chuck Φ100mm, which can hold substrate upto 6″ Dia. If your sample < 10 mm, please order rubber cup from us at extra cost   Vacuum Pump One 120L/min Oilless Vacuum Pump is included in the standard package, please click the picture below for specification details. For Ar glove box user, we recommend our 24VDC vacuum pump for simple pump and coater connection with no feedthrough required.   Spin Speed Digital control panel with six programmable segments of different spin times and speeds Maximum programmable spin time 6*60s = 360s 500 – 8000 RPM adjustable spinning speed  at each segment   Liquid Injecting 20mL syringe is used to contain the coating material   Optional You may choose Precision Electronic Single Channel Pipette: 20 – 200uL for more accurate coating Using plasma cleaner to treat substrate surface before coating can improve film quality Heating cover with digital temperature controller up to 120 ℃ is available upon request at extra cost ($1950), which allow sample drying in-situ during and after coating Vacuumable spin coater with digital gauge is available   Warranty One year limited with lifetime support. Rusting and damage due to improper storage condition or maintenance are not covered by warranty     https://www.nanoscienceandtechnology.co.in/nst-300-2hd-dual-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-300-2hd-dual-target-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 300-2HD DUAL TARGET MAGNETRON SPUTTERING COATER is a high vacuum coating equipment independently developed by our company. It can be used to prepare monolayer or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film and ceramic. Film, dielectric film, optical film, oxide film, hard film, polytetrafluoroethylene film, and the like. Compared with similar equipment, it has the advantages of small size and easy operation, and a wide range of materials that can be used. It is an ideal equipment for preparing various types of material films in the laboratory. https://www.nanoscienceandtechnology.co.in/nst-300-1hd-single-target-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-300-1hd-single-target-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST -300-1HD SINGLE TARGET MAGNETRON SPUTTERING COATER is a high vacuum coating equipment independently developed by our company. It can be used to prepare monolayer or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film and so on. The instrument is equipped with a magnetron sputtering target with a water-cooled interlayer and a 140mm heatable rotary object stage. The vacuum chamber adopts the top opening method, which makes it easier to change the target, and it is an ideal device for making various metal films. It is an ideal equipment for the preparation of films of various materials in the laboratory. https://www.nanoscienceandtechnology.co.in/nst-3-inch-two-zones-css-furnace.htm https://www.nanoscienceandtechnology.co.in/nst-3-inch-two-zones-css-furnace.htm Sat, 30 Mar 2024 00:00:00 +0530 NST-3″ TWO ZONES CSS FURNACE is heated by two group of halogen heaters (Top and Bottom) separately with max. 20ºC/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskite solar cell.   https://www.nanoscienceandtechnology.co.in/nst-3-rotary-target-plasma-sputtering-coater-with-substrate-heater.htm https://www.nanoscienceandtechnology.co.in/nst-3-rotary-target-plasma-sputtering-coater-with-substrate-heater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 3 ROTARY TARGET PLASMA SPUTTERING COATER is a compact plasma thin film sputter (DC common type). The control panel adopts the touch screen mode. The substrate has a limit of 2″, the sample is placed with a diameter of Ø50mm and the heating temperature is 500℃.3 rotary target plasma sputtering coater can sputter gold, silver and copper targets, and can not sputter light metals and carbon. This machine uses a rotating sample stage to sequentially coat three layers on the same sample.The film is suitable for the preparation of samples in the laboratory. https://www.nanoscienceandtechnology.co.in/nst-3-heads-compact-rf-plasma-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-3-heads-compact-rf-plasma-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST 3 HEADS COMPACT RF PLASMA MAGNETRON SPUTTERING COATER is mainly used to make non-conductive films, especially some oxide films.It is the most cost-effective coater for researching in the new generation of oxide thin films. https://www.nanoscienceandtechnology.co.in/kyky-sbc-12-ion-sputter-coater.htm https://www.nanoscienceandtechnology.co.in/kyky-sbc-12-ion-sputter-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 Magnetron Sputter coater https://www.nanoscienceandtechnology.co.in/nst-vacuum-magnetron-sputtering-system.htm https://www.nanoscienceandtechnology.co.in/nst-vacuum-magnetron-sputtering-system.htm Sat, 30 Mar 2024 00:00:00 +0530 NST VACUUM MAGNETRON SPUTTERING SYSTEM is used for the preparation of novel thin film materials such as nanometer single-layer and multi-layer functional film, hard film, metal film, semiconductor film and dielectric film. It can be widely used in the research and production of thin film materials in colleges and universities. https://www.nanoscienceandtechnology.co.in/tmax-two-zones-css-furnace-with-rotating-wafer-holder.htm https://www.nanoscienceandtechnology.co.in/tmax-two-zones-css-furnace-with-rotating-wafer-holder.htm Tue, 15 Oct 2024 00:00:00 +0530 TWO ZONES CSS FURNACE WITH ROTATING WAFER HOLDER is heated by two group of halogen heaters (Top and Bottom) separately with max. 10ºC/s heating rate. The top sample holder is rotatable to achieve high uniformity coating. It is an excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskite solar cell. https://www.nanoscienceandtechnology.co.in/two-in-one-film-coater.htm https://www.nanoscienceandtechnology.co.in/two-in-one-film-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 TWO IN ONE FILM COATER can meet the requirements of the surface of the scanning electron microscope sample for spraying gold, steaming gold or carbon evaporating, and the production of experimental electrodes for non-conductor materials, and can also be used for the experiments of various new materials in material research.The machine is small in size, saves laboratory space, easy to operate, easy to clean, suitable for beginners, especially suitable for use in laboratories, research institutes, and laboratories of various universities.   https://www.nanoscienceandtechnology.co.in/nst-single-chamber-magnetron-sputtering-system.htm https://www.nanoscienceandtechnology.co.in/nst-single-chamber-magnetron-sputtering-system.htm Sat, 30 Mar 2024 00:00:00 +0530 SINGLE CHAMBER MAGNETRON SPUTTERING SYSTEM is used for the preparation of novel thin film materials such as nanometer single-layer and multi-layer functional film, hard film, metal film, semiconductor film and dielectric film. It can be widely used in the research of thin film materials and the production of small batch. It can be widely used in universities and colleges, scientific research institutes of thin film materials preparation research and small batch. https://www.nanoscienceandtechnology.co.in/nst-programmable-single-chamber-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-programmable-single-chamber-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 PROGRAMMABLE SINGLE CHAMBER MAGNETRON SPUTTERING COATER is a single-chamber structure, mainly composed of sputtering vacuum chamber, magnetron sputtering target, ion bombardment, revolution substrate, optical heating system, sputtering power supply, working gas path, vacuum acquisition system, installation machine, vacuum measurement, water cooling, alarm system and control system,etc.   The system is controlled by IPC and PLC, with two modes of automatic and manual control. In addition to put the sample, all other processes are realized on the touch screen. It provides man-machine operation interface such as vacuum system, sputtering process setting, filling and venting system, etc. On the IPC, you can set parameters through the formula, to implement the procedure process and equipment parameter Settings. https://www.nanoscienceandtechnology.co.in/nst-plasma-magnetron-sputtering-coater.htm https://www.nanoscienceandtechnology.co.in/nst-plasma-magnetron-sputtering-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 NST PLASMA MAGNETRON SPUTTERING COATER is an excellent and cost effective coater for coating thin film of non-conductive material in RF plasma magnetron sputtering coater is small in size, occupies less laboratory space, simple in operation and widely used. Therefore, it is widely used in the laboratories of major universities and research institutes. https://www.nanoscienceandtechnology.co.in/nst-organic-and-inorganic-evaporation-coater.htm https://www.nanoscienceandtechnology.co.in/nst-organic-and-inorganic-evaporation-coater.htm Tue, 15 Oct 2024 00:00:00 +0530 ORGANIC AND INORGANIC EVAPORATION COATER adopts linear structure and is mainly composed of two organic material growth chambers which are connected by gate valves. One of the two growth Chambers is reserved for the butt joint interface with the glove box, which can complete the transfer of substrates between two independent film preparation systems. The organic material growth chamber mainly consists of vacuum chamber assembly, organic evaporation source, thermal resistance evaporation boat, sample transfer device, sample platform, film thickness monitor, vacuum chamber lighting device, baking device and so on. https://www.nanoscienceandtechnology.co.in/compact-uv-ozone-cleaner.htm https://www.nanoscienceandtechnology.co.in/compact-uv-ozone-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 Compact UV-Ozone Cleaner proven to be highly effective for non-acidic, dry, non-destructive atomic cleaning and removal of organic contaminants using intense 185 nm and 254 nm UV light. Under air and room temperature, the 185 line produces Ozone and while the 254 line excites organic molecules on the surface. This combination drives the rapid destruction and decimation of organic contaminants.   UV Lamp Solid metal double wave mercury lamp UV lamp power: 55W Max. Wave length: 254 nm and 185 nm UV Lamp service life: 2500 hrs UV light area: 100×100 mm ( 4″×4″) Peak UV intensities: 4.6 milliwatts/cm2.   Chamber & Sample Stage Overall Dimensions:   9 1⁄2” ×7 7/8” ×6” Drawer Dimensions:133mm×133mm×25mm Distance from drawer to lamp: 27mm Distance from pedestal to lamp: 8mm Borosilicate Glass Pedestal:  4”×4”×3⁄4” 18 Gauge Steel Chassis and Cover, Powder Coated Finish Total Weight: 9 lbs.   Environmental Requirement Indoor Use Only; Altitude Use Up To 5,562 Feet; Temperature Range 41-104 Degrees Fahrenheit; Maximum Relative Humidity 80%, Up To 87 Degrees Fahrenheit Decreasing Linearly to 50% Relative Humidity At 104 Degrees Fahrenheit; Main Power Supply Fluctuations Not To Exceed 10% Of The Nominal Voltage; Overvoltage Category II; Pollution Degree 2; ozone level (ambient) measurement at <45 ppb.   Application: Cleaning molecular contamination from SPTs, AFM tips, and surfaces Curing UV-adhesives UV-photopatterning of SAM surfaces Oxidizing PDMS Surface sterilization Etch, pattern, sharpen Clean MEMS devices Clean substrate surfaces such as Si, Ge, GaAs and all oxide crystal  substrate https://www.nanoscienceandtechnology.co.in/atmospheric-plasma-surface-treatment-system.htm https://www.nanoscienceandtechnology.co.in/atmospheric-plasma-surface-treatment-system.htm Sat, 30 Mar 2024 00:00:00 +0530 ATMOSPHERIC PLASMA SURFACE TREATMENT INSTRUMENT is an excellent tool for cleaning wafer surface before epitaxial or optical fiber before welding to obtain higher quality. This device also may be used for studying atmosphere pressure CVD.   Atmospheric plasma surface treatment instrument main features: High speed surface treatment with simple and safe operation Neither vacuum  nor chamber required with versatile plasma chemistry Handheld or in-line processing at low cost Light weight and compact size   Warranty & Certificate One year limited with lifetime support CE certified   Application Notes This Atmospheric Plasma Jet-Flow system is excellent to clean plastic, polymer and oxide substrate surface before coating This device also may be used for studying atmospheric pressure CVD. https://www.nanoscienceandtechnology.co.in/nst-atmospheric-low-temperature-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-atmospheric-low-temperature-plasma-cleaner.htm Tue, 02 Apr 2024 00:00:00 +0530 ATMOSPHERIC LOW TEMPERATURE PLASMA CLEANER acts on the surface of the solid sample, which not only removes the original contaminants and impurities, but also produces an etching effect, which roughens the surface of the sample and forms many fine pits, increasing the ratio of the sample. Surface, improve the wetting properties of the solid surface. https://www.nanoscienceandtechnology.co.in/nst-70mm-rotary-spray-gun-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-70mm-rotary-spray-gun-plasma-cleaner.htm Thu, 03 Oct 2024 00:00:00 +0530 PLASMA CLEANER, also known as plasma surface treatment device, is a new high-tech technology that uses plasma to achieve the results that conventional cleaning methods cannot achieve. Plasma is a state of matter, also called the fourth state of matter, and does not belong to the common three-state of solid-liquid-gas. Applying enough energy to the gas to ionize it becomes a plasma state. The “active” components of the plasma include: ions, electrons, atoms, active groups, excited states of nuclides (metastasis), photons, and the like. Plasma cleaner is to treat the surface of the sample by utilizing the properties of these active components, thereby achieving the purpose of cleaning, coating, etc., improving the surface adhesion of the product, and facilitating the bonding, spraying, printing and sealing of the product.   Low processing temperature The processing temperature can be as low as 80℃ and below 50 ℃. Low processing temperatures ensure no thermal effects on the sample surface.   No pollution during the whole process The plasma cleaner itself is a very environmentally friendly device that does not cause any pollution and does not cause any pollution during the treatment process. It can be combined with the original production line to achieve fully automatic online production, saving labor costs.   Stable treatment effect The treatment effect of plasma cleaning is very uniform and stable, and the conventional sample maintains good effect for a long time after treatment.   70mm rotary spray gun plasma cleaner product principle: The structure of the plasma cleaner is mainly divided into three major components, namely high-voltage excitation power supply, plasma generator spray gun, and control system.   High-voltage excitation power supply: The generation of plasma requires high-voltage excitation, and the atmospheric low-temperature plasma is excited by an intermediate frequency power supply at a frequency of 10-40 kHz. The high voltage is at 4-10KV. The parameters can be adjusted according to the actual conditions of the sample, and the optimal modification effect has been achieved.   Plasma generator spray gun: The atmospheric low-temperature plasma generator spray gun can be divided into two types: jet flow direct injection and rotary direct injection, the difference is that the treatment area is different.   Control system: The control system functions is to control the operation of the entire atmospheric low temperature plasma cleaning equipment and the protection of the overall system. https://www.nanoscienceandtechnology.co.in/nst-5l-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-5l-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 PLASMA CLEANER 5L Featrues: Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors, oxides, and most.   Applications Car industry: ignition coil engine oil seal film Defense industry: Aerospace electrical connectors,Kevlar deal Electronics industry: hard plastic parts, earphone, Cell phone cover Medical industry: intravenous infusion, catheter treatment Textile fiber,rubber and plastic industry and etc. https://www.nanoscienceandtechnology.co.in/4mm-direct-spray-gun-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/4mm-direct-spray-gun-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 THE ROLE OF PLASMA CLEANING THE PRINCIPLE OF PLASMA CLEANING IS MAINLY: ETCHING ON THE SURFACE OF THE MATERIAL – PHYSICAL EFFECT A large number of active particles in the plasma, such as a large number of ions, excited molecules, and free radicals, act on the surface of the solid sample, which not only removes the original contaminants and impurities, but also produces an etching effect to roughen the surface of the sample and form many fine pits, which increases the specific surface of the sample,improves the wetting properties of solid surfaces.   Activation bond energy, cross-linking The energy of the particles in the plasma is between 0 and 20 eV, and most of the bond energy in the polymer are between 0 and 10 eV. Therefore, after the plasma acts on the solid surface, the original chemical bond on the solid surface can be broken. Free radicals in the plasma form a network of crosslinked structures with these bonds, greatly activating surface activity.   Formation of new functional groups – chemical action If a reactive gas is introduced into the electric discharge gas, a complicated chemical reaction occurs on the surface of the activated material, and new functional groups such as hydrocarbonyl, amidogen, carboxyl group, and the like are introduced, and these functional groups are all active groups, which can significantly improve the surface activity of the material.   Advantages of atmospheric low temperature plasma cleaning Plasma cleaning is an important material surface modification method and has been widely used in many fields. Compared with some traditional cleaning methods, such as ultrasonic cleaning, UV cleaning, etc., it has the following advantages:   Low processing temperature The processing temperature can be as low as 80℃ and below 50 ℃. Low processing temperatures ensure no thermal effects on the sample surface.   No pollution during the whole process The plasma cleaner itself is a very environmentally friendly device that does not cause any pollution and does not cause any pollution during the treatment process. It can be combined with the original production line to achieve fully automatic online production, saving labor costs.   Stable treatment effect The treatment effect of plasma cleaning is very uniform and stable, and the conventional sample maintains good effect for a long time after treatment. It can be perfectly matched with automated assembly lines to increase production efficiency According to the user’s site requirements, the optimal assembly line production plan is configured to greatly improve production efficiency.     Product principle The structure of the plasma cleaning machine is mainly divided into three major components, namely high-voltage excitation power supply, plasma generator spray gun, and control system.   High-voltage excitation power supply: The generation of plasma requires high-voltage excitation, and the atmospheric low-temperature plasma is excited by an intermediate frequency power supply at a frequency of 10-40 kHz. The high voltage is at 4-10KV. The parameters can be adjusted according to the actual conditions of the sample, and the optimal modification effect has been achieved.   Plasma generator spray gun: The atmospheric low-temperature plasma generator spray gun can be divided into two types: jet flow direct injection and rotary direct injection, the difference is that the treatment area is different.   Control system: The control system functions is to control the operation of the entire atmospheric low temperature plasma cleaning equipment and the protection of the overall system. https://www.nanoscienceandtechnology.co.in/nst-45mm-rotary-spray-gun-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-45mm-rotary-spray-gun-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 45MM ROTARY SPRAY GUN PLASMA CLEANER can be processed online at high speed to improve production efficiency. The characteristics of the plasma are used to clean, activate and activate the surface of the solid material to be treated, thereby realizing the purpose of changing the surface microstructure, chemical properties and energy.   https://www.nanoscienceandtechnology.co.in/nst-10l-13-56mhz-plasma-cleaner.htm https://www.nanoscienceandtechnology.co.in/nst-10l-13-56mhz-plasma-cleaner.htm Sat, 30 Mar 2024 00:00:00 +0530 PLASMA CLEANER Featrues: Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors. https://www.nanoscienceandtechnology.co.in/nst-pcb-board-plasma-cleaning-machine.htm https://www.nanoscienceandtechnology.co.in/nst-pcb-board-plasma-cleaning-machine.htm Sat, 30 Mar 2024 00:00:00 +0530 PLASMA CLEANING MACHINE EQUIPMENT PRINCIPLE: ETCHING ON THE SURFACE OF THE MATERIAL – PHYSICAL EFFECT A large number of active particles in the plasma, such as a large number of ions, excited molecules, and free radicals, act on the surface of the solid sample, which not only removes the original contaminants and impurities, but also produces an etching effect to roughen the surface of the sample and form many fine pits, which increases the specific surface of the sample,improves the wetting properties of solid surfaces.   Activation bond energy, cross-linking The energy of the particles in the plasma is between 0 and 20 eV, and most of the bond energy in the polymer are between 0 and 10 eV. Therefore, after the plasma acts on the solid surface, the original chemical bond on the solid surface can be broken. Free radicals in the plasma form a network of crosslinked structures with these bonds, greatly activating surface activity.   Formation of new functional groups – chemical action If a reactive gas is introduced into the electric discharge gas, a complicated chemical reaction occurs on the surface of the activated material, and new functional groups such as hydrocarbonyl, amidogen, carboxyl group, and the like are introduced, and these functional groups are all active groups, which can significantly improve the surface activity of the material. https://www.nanoscienceandtechnology.co.in/precision-temperature-controlled-hi-vacuum-thermal-evaporating-coater.htm https://www.nanoscienceandtechnology.co.in/precision-temperature-controlled-hi-vacuum-thermal-evaporating-coater.htm Sat, 30 Mar 2024 00:00:00 +0530 PRECISION TEMPERATURE CONTROLLED HI-VACUUM THERMAL EVAPORATING COATER has a wide application range and can prepare various metal thin films and organic thin films, and thus is widely used for electrode preparation and preparation of organic light-emitting LEDs.This equipment is small in size, which can effectively save laboratory space; it is easy to operate and has strong adaptability to different materials, so it is widely used in the laboratories of universities and research institutes.   Precision temperature controlled hi-vacuum thermal evaporating coater features: 6″ OD x 10”H quartz chamber for easy cleaning and sample loading 2″ Dia rotatable sample holder for uniform film coating Tungsten coil heater and alumina crucible for high-temperature coating up to 1700℃ Precision temperature control with 30 programmable segments and +/- 1℃ accuracy High vacuum can be achieved up to 1.0E-5 Torr via optional turbo pump Gas flow port and valve are built in for chamber purge and CVD possibility https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar4-laboratory-200c-larger-capacity-vacuum-drying-oven.htm https://www.nanoscienceandtechnology.co.in/nst-jk-zkhx-ar4-laboratory-200c-larger-capacity-vacuum-drying-oven.htm Fri, 09 May 2025 00:00:00 +0530 NST-JK-ZKHX-AR4 is a floor stand vacuum drying/degassing/bake-out oven with large capacity. It is manufactured with carefully selected UL/CSA/MET electrical components ( >24V DC/AC) which ensure the outstanding system performance and quality. https://www.nanoscienceandtechnology.co.in/nst-desktop-plasma-sputtering-coater-with-rotary-sample-stage.htm https://www.nanoscienceandtechnology.co.in/nst-desktop-plasma-sputtering-coater-with-rotary-sample-stage.htm Sat, 30 Mar 2024 00:00:00 +0530 This type of SMALL PLASMA SPUTTERING COATING machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage.   https://www.nanoscienceandtechnology.co.in/nst-desktop-plasma-sputtering-coater-with-rotary-sample-stage.htm https://www.nanoscienceandtechnology.co.in/nst-desktop-plasma-sputtering-coater-with-rotary-sample-stage.htm Sat, 30 Mar 2024 00:00:00 +0530 This type of SMALL PLASMA SPUTTERING COATING machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage.   https://www.nanoscienceandtechnology.co.in/nst-high-efficiency-0-4l-planetary-ball-mill-for-nano-powder-grinding.htm https://www.nanoscienceandtechnology.co.in/nst-high-efficiency-0-4l-planetary-ball-mill-for-nano-powder-grinding.htm Sat, 30 Mar 2024 00:00:00 +0530 PLANETARY BALL MILLS are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of planetary ball mills result in very high pulverization energy and therefore short grinding times. https://www.nanoscienceandtechnology.co.in/nst-automatic-lab-vacuum-film-coating-machine.htm https://www.nanoscienceandtechnology.co.in/nst-automatic-lab-vacuum-film-coating-machine.htm Tue, 15 Oct 2024 00:00:00 +0530 AUTOMATIC LAB VACUUM FILM COATING MACHINE for Battery Electrode Coating with Dryer.   https://www.nanoscienceandtechnology.co.in/touch-screen-vertical-lab-planetary-ball-mill-machine.htm https://www.nanoscienceandtechnology.co.in/touch-screen-vertical-lab-planetary-ball-mill-machine.htm Sat, 06 Apr 2024 00:00:00 +0530 PLANETARY BALL MILLS are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of planetary ball mills result in very high pulverization energy and therefore short grinding times. https://www.nanoscienceandtechnology.co.in/nst-17-litre-reaction-cavity-mini-vacuum-plasma-treatment-machine.htm https://www.nanoscienceandtechnology.co.in/nst-17-litre-reaction-cavity-mini-vacuum-plasma-treatment-machine.htm Sun, 05 Jul 2026 00:00:00 +0530 The NST Series Plasma Surface Treatment Equipment offers advanced surface treatment for materials like polymers, metals, and semiconductors. It features a 40Khz/13.56MHz RF power supply with auto-matching, multi-layer electrodes for uniform ion distribution, and a dry, low-temperature process suitable for heat-sensitive materials. The system ensures high stability, low energy consumption, and a PLC control system by Siemens. With a compact reaction cavity and precise gas control, it supports complex 3D workpieces without altering material properties. https://www.nanoscienceandtechnology.co.in/25-litre-vacuum-plasma-cleaner-surface-treatment-machine.htm https://www.nanoscienceandtechnology.co.in/25-litre-vacuum-plasma-cleaner-surface-treatment-machine.htm Sun, 05 Jul 2026 00:00:00 +0530 The NST Series Vacuum Plasma Cleaner is designed for surface purification, activation, coarsening, etching, and grafting, suitable for treating polymers, metals, and semiconductors. It features a 25L chamber, 13.56MHz RF power supply with auto-matching, precise gas control via Horiba Mass Flow Controller, and a PLC control system by Siemens. Advantages include dry treatment processes, low-temperature operation for heat-sensitive materials, high stability, long service life, and low energy consumption. https://www.nanoscienceandtechnology.co.in/oxygen-plasma-cleaner-40khz-13-56mhz-100w-300w-500w-1000w.htm https://www.nanoscienceandtechnology.co.in/oxygen-plasma-cleaner-40khz-13-56mhz-100w-300w-500w-1000w.htm Sun, 05 Jul 2026 00:00:00 +0530 Technical parameters:\r\nChamber material : High purity quartz\r\nChamber size : Diameter 150 mm; Length 270 mm\r\nRF power supply\r\nPower supply features\r\nThe power supply is an all-solid-state RF power supply, and adopts a high-stability and high-reliability power amplifier module and a DC module, which effectively ensures the RF power output of the power supply. High quality electronic components are used to ensure the reliability of the products.\r\nPower advantage\r\n1. Long time normal operation. 2. Simple and flexible operation. 3. High power supply efficiency and low heat generation. 4. With perfect reflection power protection function.\r\nRF power: 0~100W/300W/500W/1000W continuously adjustable\r\nRF connector : N type connector\r\nSignal frequency : 40KHz/13.56MHz ±0.005%\r\nMachine efficiency : ≥75%\r\nReflected power : ≤100W\r\nHarmonic component : ≤-50 dB\r\nPower stability : ±0.1%\r\ncooling method : Forced air cooling\r\nGas measurement : Measuring unit\r\nFloat flowmeter :\r\nA channel range :10～ 100ml\r\nGas channel :Two channels\r\nB channel range :16～ 160ml\r\nVacuum Measurement : Digital vacuum gauge (resistance gauge) display on HMI\r\nMotor noise :≤56dB\r\nVacuum pump : Two-stage rotary vane vacuum pump\r\nPipe interface :\r\nGas inlet: KF16 exhaust port KF16\r\nMotor Power : 230V 50 Hz: Single Phase\r\nConnecting pipe :KF16 vacuum bellows\r\nPumping rate : 50 Hz: 15m3/hr; 250 LPM\r\nVacuum valve : Solenoid valve\r\nVacuum range : 0.001mbar～1024 mbar\r\nMotor Power : 400W\r\nUltimate vacuum : 0.001 mbar\r\nOther \r\nPower supply : AC220V 50/60Hz\r\nWorking vacuum : ≤40Pa\r\nTotal power : 550W/600W\r\nOverall size : 600mm×500mm×560mm\r\nOperating temperature : -10℃ - 40℃\r\nTotal Weight : 80kg (with packaging) https://www.nanoscienceandtechnology.co.in/300w-10l-oxygen-plasma-cleaner-nst-m103l.htm https://www.nanoscienceandtechnology.co.in/300w-10l-oxygen-plasma-cleaner-nst-m103l.htm Mon, 06 Jul 2026 00:00:00 +0530 Model No. NST-M10L Product Name 10L Plasma Cleaner Operation Manual Working voltage AC 220V, 50Hz RF Frequency 40KHz (13.56MHz for optional) Coupled mode condenser coupling, without pollute sample RF power 1000 w RF offset < 0.2KHz Characteristic impedance 50Ω, automatic matching Vacuum degree 10-100Pa, equipped with a mechanical pump   If request high vacuum, please select our turbo pump system (Optional) Gas speed Two way Float Flow Gas Control10-100ml/min, adjustable Control Manual Inner chamber size  Stainless Steel Chamber with Φ 200X350mm   If Chamber is not enough for using, we have Φ 200X350mm (capacity: 10L) 200* 200*260mm (capacity: 10L)for optional Pressure Gauge A simple digital pressure gauge is equipped for reading   If request high precision vacuum reading, please select digital vacuum gauge: (Optional) Cooling way Forced cooling Outer dimension 440*390*200mm Gross weight 35 kg Time of delivery 10 working days after receive the payment https://www.nanoscienceandtechnology.co.in/300w-2l-oxygen-plasma-cleaner-nst-m2l.htm https://www.nanoscienceandtechnology.co.in/300w-2l-oxygen-plasma-cleaner-nst-m2l.htm Sun, 05 Jul 2026 00:00:00 +0530 https://www.nanoscienceandtechnology.co.in/300w-3l-oxygen-plasma-cleaner-nst-m3l.htm https://www.nanoscienceandtechnology.co.in/300w-3l-oxygen-plasma-cleaner-nst-m3l.htm Sun, 05 Jul 2026 00:00:00 +0530 Model No. NST-M3L Product Name 3L Plasma Cleaner Operation Manual Working voltage AC 220V, 50Hz RF Frequency 40KHz (13.56MHz for optional) Coupled mode condenser coupling, without pollute sample RF power 300 w RF offset < 0.2KHz Characteristic impedance 50Ω, automatic matching Vacuum degree 10-100Pa, equipped with a mechanical pump   If request high vacuum, please select our turbo pump system (Optional) Gas speed Two way Float Flow Gas Control10-100ml/min, adjustable Control Manual Inner chamber size  Stainless Steel Chamber with Φ 155X165mm   If Chamber is not enough for using, we have Φ 155X165mm (capacity: 3L) 200* 200*260mm (capacity: 10L)for optional Pressure Gauge A simple digital pressure gauge is equipped for reading   If request high precision vacuum reading, please select digital vacuum gauge: (Optional) Cooling way Forced cooling Outer dimension 440*390*200mm Gross weight 35 kg Time of delivery 10 working days after receive the payment https://www.nanoscienceandtechnology.co.in/300w-5l-oxygen-plasma-cleaner-nst-m5l.htm https://www.nanoscienceandtechnology.co.in/300w-5l-oxygen-plasma-cleaner-nst-m5l.htm Sun, 05 Jul 2026 00:00:00 +0530 NST 5L plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small https://www.nanoscienceandtechnology.co.in/300w-8l-oxygen-plasma-cleaner-nst-m8l.htm https://www.nanoscienceandtechnology.co.in/300w-8l-oxygen-plasma-cleaner-nst-m8l.htm Sun, 05 Jul 2026 00:00:00 +0530 Model No. NST-M8L Product Name 8L Plasma Cleaner Operation Manual Working voltage AC 220V, 50Hz RF Frequency 40KHz (13.56MHz for optional) Coupled mode condenser coupling, without pollute sample RF power 300 w RF offset < 0.2KHz Characteristic impedance 50Ω, automatic matching Vacuum degree 10-100Pa, equipped with a mechanical pump   If request high vacuum, please select our turbo pump system (Optional) Gas speed Two way Float Flow Gas Control10-100ml/min, adjustable Control Manual Inner chamber size  Stainless Steel Chamber with Φ 210X250mm   If Chamber is not enough for using, we have Φ 210X250mm (capacity: 8L) 200* 200*260mm (capacity: 10L)for optional Pressure Gauge A simple digital pressure gauge is equipped for reading   If request high precision vacuum reading, please select digital vacuum gauge: (Optional) Cooling way Forced cooling Outer dimension 440*390*200mm Gross weight 35 kg Time of delivery 10 working days after receive the payment https://www.nanoscienceandtechnology.co.in/130-litre-plasma-surface-treatment-machine.htm https://www.nanoscienceandtechnology.co.in/130-litre-plasma-surface-treatment-machine.htm Sun, 05 Jul 2026 00:00:00 +0530 The Plasma Surface Treatment Machine is designed for surface activation and cleaning of plastic, metal, and chips. It features a 130L chamber, supports multiple treatment gases (O2, Ar, N2, H2, CF4, CDA), and includes a Siemens PLC system, Schneider electrical system, and a 10.7-inch touch screen. It ensures dry, low-temperature processing, making it ideal for heat-sensitive materials, and offers high stability with low energy consumption and maintenance costs. Optional configurations include an RF generator and customizable vacuum chamber sizes.